Cantilever beam design for projectile internal moving mass systems / Jonathan Rogers in Transactions of the ASME . Journal of dynamic systems, measurement, and control, Vol. 131 N° 5 (Septembre 2009)  

Public ISBD [article]  inTransactions of the ASME . Journal of dynamic systems, measurement, and control > Vol. 131 N° 5 (Septembre 2009) . - 11 p. Titre : Cantilever beam design for projectile internal moving mass systems Type de document : texte imprimé Auteurs : Jonathan Rogers, Auteur ; Costello, Mark, Auteur Année de publication : 2009 Article en page(s) : 11 p. Note générale : dynamic systems Langues : Anglais (eng) Mots-clés : internal masses  cantilever beam  electromagnetic actuators Résumé : Internal masses that undergo controlled translation within a projectile have been shown to be effective control mechanisms for smart weapons. However, internal mass oscillation must occur at the projectile roll frequency to generate sufficient control force. This can lead to high power requirements and place a heavy burden on designers attempting to allocate volume within the projectile for internal mass actuators and power supplies. The work reported here outlines a conceptual design for an internal translating mass system using a cantilever beam and electromagnetic actuators. The cantilever beam acts as the moving mass, vibrating at the projectile roll frequency to generate control force. First, a dynamic model is developed to describe the system. Then the natural frequency, damping ratio, and length of the beam are varied to study their affects on force required and total battery size. Trade studies also examine the effect on force required and total battery size of a roll-rate feedback system that actively changes beam elastic properties. Results show that, with proper sizing and specifications, the cantilever beam control mechanism requires relatively small batteries and low actuator control forces with minimum actuator complexity and space requirements. DEWEY : 629.8 ISSN : 0022-0434 En ligne : http://dynamicsystems.asmedigitalcollection.asme.org/Issue.aspx?issueID=26502&di [...] [article] Cantilever beam design for projectile internal moving mass systems [texte imprimé] / Jonathan Rogers, Auteur ; Costello, Mark, Auteur . - 2009 . - 11 p. dynamic systems Langues : Anglais (eng) in Transactions of the ASME . Journal of dynamic systems, measurement, and control > Vol. 131 N° 5 (Septembre 2009) . - 11 p. Mots-clés : internal masses  cantilever beam  electromagnetic actuators Résumé : Internal masses that undergo controlled translation within a projectile have been shown to be effective control mechanisms for smart weapons. However, internal mass oscillation must occur at the projectile roll frequency to generate sufficient control force. This can lead to high power requirements and place a heavy burden on designers attempting to allocate volume within the projectile for internal mass actuators and power supplies. The work reported here outlines a conceptual design for an internal translating mass system using a cantilever beam and electromagnetic actuators. The cantilever beam acts as the moving mass, vibrating at the projectile roll frequency to generate control force. First, a dynamic model is developed to describe the system. Then the natural frequency, damping ratio, and length of the beam are varied to study their affects on force required and total battery size. Trade studies also examine the effect on force required and total battery size of a roll-rate feedback system that actively changes beam elastic properties. Results show that, with proper sizing and specifications, the cantilever beam control mechanism requires relatively small batteries and low actuator control forces with minimum actuator complexity and space requirements. DEWEY : 629.8 ISSN : 0022-0434 En ligne : http://dynamicsystems.asmedigitalcollection.asme.org/Issue.aspx?issueID=26502&di [...]

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire