Analytical study for deformability of laminated sheet metal with full interfacial bond / Mohammed Hassanien Serror in Journal of engineering mechanics, Vol. 139 N° 1 (Janvier 2013)  

Public ISBD [article]  inJournal of engineering mechanics > Vol. 139 N° 1 (Janvier 2013) . - pp.94–103. Titre : Analytical study for deformability of laminated sheet metal with full interfacial bond Type de document : texte imprimé Auteurs : Mohammed Hassanien Serror, Auteur ; Junya Inoue, Auteur Année de publication : 2013 Article en page(s) : pp.94–103. Note générale : Mécanique appliquée Langues : Anglais (eng) Mots-clés : Sheet metal laminate Necking instability Deformability Power-law model Résumé : While a freestanding high-strength sheet metal subject to tension will rupture at a small strain, it is anticipated that lamination with a ductile sheet metal will retard this instability to an extent that depends on the relative thickness, relative stiffness, and hardening exponent of the ductile sheet. This paper presents an analytical study for the deformability of such a laminate under tensile load within the context of necking instability. Laminates of high-strength sheet metal and ductile low-strength sheet metal are studied assuming (1) the sheets are fully bonded and (2) the metals obey the power-law material model. The effect of the hardening exponent, volume fraction, and relative stiffness of the ductile component has been studied. The stability of both uniform and nonuniform deformations has been investigated. The results have shown retardation of the high-strength layer instability by lamination with the ductile layer. The laminate exhibits marked enhancement in the strength-ductility combination, which is essential in metal-forming applications. ISSN : 0733-9399 En ligne : http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29EM.1943-7889.0000459 [article] Analytical study for deformability of laminated sheet metal with full interfacial bond [texte imprimé] / Mohammed Hassanien Serror, Auteur ; Junya Inoue, Auteur . - 2013 . - pp.94–103. Mécanique appliquée Langues : Anglais (eng) in Journal of engineering mechanics > Vol. 139 N° 1 (Janvier 2013) . - pp.94–103. Mots-clés : Sheet metal laminate Necking instability Deformability Power-law model Résumé : While a freestanding high-strength sheet metal subject to tension will rupture at a small strain, it is anticipated that lamination with a ductile sheet metal will retard this instability to an extent that depends on the relative thickness, relative stiffness, and hardening exponent of the ductile sheet. This paper presents an analytical study for the deformability of such a laminate under tensile load within the context of necking instability. Laminates of high-strength sheet metal and ductile low-strength sheet metal are studied assuming (1) the sheets are fully bonded and (2) the metals obey the power-law material model. The effect of the hardening exponent, volume fraction, and relative stiffness of the ductile component has been studied. The stability of both uniform and nonuniform deformations has been investigated. The results have shown retardation of the high-strength layer instability by lamination with the ductile layer. The laminate exhibits marked enhancement in the strength-ductility combination, which is essential in metal-forming applications. ISSN : 0733-9399 En ligne : http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29EM.1943-7889.0000459

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire