Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur BinJie Dong
Documents disponibles écrits par cet auteur
Affiner la rechercheExperimental study of the flow induced by a sinusoidal dielectric barrier discharge actuator and its effects on a flat plate natural boundary layer / Pierre Magnier in Transactions of the ASME . Journal of fluids engineering, Vol. 131 N° 1 (Janvier 2009)
[article]
in Transactions of the ASME . Journal of fluids engineering > Vol. 131 N° 1 (Janvier 2009) . - 11 p.
Titre : Experimental study of the flow induced by a sinusoidal dielectric barrier discharge actuator and its effects on a flat plate natural boundary layer Type de document : texte imprimé Auteurs : Pierre Magnier, Auteur ; Vincent Boucinha, Auteur ; BinJie Dong, Auteur Année de publication : 2009 Article en page(s) : 11 p. Note générale : fluids engineering Langues : Anglais (eng) Mots-clés : electrohydrodynamic actuator; sinusoidal dielectric barrier discharges; velocimetry system Résumé : Since the mid-1990s, electrohydrodynamic actuators have been developed for modifying on subsonic airflows. The principle of plasma action is the use of the direct conversion of electrical energy into kinetic energy in order to act on the flow boundary layer. This paper presents our contribution to such an investigation concerning an electrohydrodynamic actuator consisting of several sinusoidal dielectric barrier discharges. First, the ionic wind induced by this actuator was measured with a pressure sensing probe. The induced flow velocity increased with the applied voltage and frequency. The particle image velocimetry system without external airflow showed the presence of induced swirls, generated by the ion movement in plasma. Then the action of this actuator on a flat plate boundary layer in parallel flow at zero incidence was studied in a subsonic wind tunnel. Experiments were performed for 15 m/s and 22 m/s. They showed that electric discharges (±8 kV, 1 kHz) acting on a laminar flow tripped the laminar-to-turbulent transition. Moreover, higher applied voltages (up to ±12 kV, 1 kHz) were necessary for modifying turbulent boundary layers. DEWEY : 620.1 ISSN : 0098-2202 En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/issue.aspx?journalid=122 [...] [article] Experimental study of the flow induced by a sinusoidal dielectric barrier discharge actuator and its effects on a flat plate natural boundary layer [texte imprimé] / Pierre Magnier, Auteur ; Vincent Boucinha, Auteur ; BinJie Dong, Auteur . - 2009 . - 11 p.
fluids engineering
Langues : Anglais (eng)
in Transactions of the ASME . Journal of fluids engineering > Vol. 131 N° 1 (Janvier 2009) . - 11 p.
Mots-clés : electrohydrodynamic actuator; sinusoidal dielectric barrier discharges; velocimetry system Résumé : Since the mid-1990s, electrohydrodynamic actuators have been developed for modifying on subsonic airflows. The principle of plasma action is the use of the direct conversion of electrical energy into kinetic energy in order to act on the flow boundary layer. This paper presents our contribution to such an investigation concerning an electrohydrodynamic actuator consisting of several sinusoidal dielectric barrier discharges. First, the ionic wind induced by this actuator was measured with a pressure sensing probe. The induced flow velocity increased with the applied voltage and frequency. The particle image velocimetry system without external airflow showed the presence of induced swirls, generated by the ion movement in plasma. Then the action of this actuator on a flat plate boundary layer in parallel flow at zero incidence was studied in a subsonic wind tunnel. Experiments were performed for 15 m/s and 22 m/s. They showed that electric discharges (±8 kV, 1 kHz) acting on a laminar flow tripped the laminar-to-turbulent transition. Moreover, higher applied voltages (up to ±12 kV, 1 kHz) were necessary for modifying turbulent boundary layers. DEWEY : 620.1 ISSN : 0098-2202 En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/issue.aspx?journalid=122 [...]