Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur E.- S. Zanoun
Documents disponibles écrits par cet auteur
Affiner la rechercheA study on flow transition and development in circular and rectangular ducts / E.- S. Zanoun in Transactions of the ASME . Journal of fluids engineering, Vol. 131 N° 6 (Juin 2009)
[article]
in Transactions of the ASME . Journal of fluids engineering > Vol. 131 N° 6 (Juin 2009) . - 10 p.
Titre : A study on flow transition and development in circular and rectangular ducts Type de document : texte imprimé Auteurs : E.- S. Zanoun, Auteur ; M. Kito, Auteur ; C. Egbers, Auteur Année de publication : 2009 Article en page(s) : 10 p. Note générale : fluids engineering Langues : Anglais (eng) Mots-clés : flow (dynamics); channels (hydraulic engineering); measurement; turbulence; Reynolds number; pipes; ducts; pipe flow Résumé : The present paper reports observations on some aspects regarding the dependence of the transition Reynolds number and flow development on the inlet flow conditions and the entrance length in circular and rectangular ducts for Rem≤106×103, where Rem is the Reynolds number based on the bulk flow velocity (U¯b) and the duct integral length scale (D). The hot-wire anemometer was used to carry out measurements close to the circular duct exit; however, the laser-Doppler anemometry was utilized for the rectangular duct measurements. Particular considerations were given to the bulk flow velocity, the mean-velocity profile, the centerline-average-velocity, and the centerline turbulence statistics to the fourth order. Transition criteria in both ducts were discussed, reflecting effects of flow geometry, entrance flow conditions, and entrance length on the transition Reynolds number. A laminar behavior was maintained up to Rem≈15.4×103 and Rem≈2×103 in the circular and rectangular ducts, respectively, and the transition was observed to take place at different downstream positions as the inlet flow velocity varied. En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/issue.aspx?journalid=122 [...] [article] A study on flow transition and development in circular and rectangular ducts [texte imprimé] / E.- S. Zanoun, Auteur ; M. Kito, Auteur ; C. Egbers, Auteur . - 2009 . - 10 p.
fluids engineering
Langues : Anglais (eng)
in Transactions of the ASME . Journal of fluids engineering > Vol. 131 N° 6 (Juin 2009) . - 10 p.
Mots-clés : flow (dynamics); channels (hydraulic engineering); measurement; turbulence; Reynolds number; pipes; ducts; pipe flow Résumé : The present paper reports observations on some aspects regarding the dependence of the transition Reynolds number and flow development on the inlet flow conditions and the entrance length in circular and rectangular ducts for Rem≤106×103, where Rem is the Reynolds number based on the bulk flow velocity (U¯b) and the duct integral length scale (D). The hot-wire anemometer was used to carry out measurements close to the circular duct exit; however, the laser-Doppler anemometry was utilized for the rectangular duct measurements. Particular considerations were given to the bulk flow velocity, the mean-velocity profile, the centerline-average-velocity, and the centerline turbulence statistics to the fourth order. Transition criteria in both ducts were discussed, reflecting effects of flow geometry, entrance flow conditions, and entrance length on the transition Reynolds number. A laminar behavior was maintained up to Rem≈15.4×103 and Rem≈2×103 in the circular and rectangular ducts, respectively, and the transition was observed to take place at different downstream positions as the inlet flow velocity varied. En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/issue.aspx?journalid=122 [...]