Choice of low temperature salt for a resorption refrigerator / H. S. Bao in Industrial & engineering chemistry research, Vol. 49 N° 10 (Mai 2010)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 49 N° 10 (Mai 2010) . - pp. 4897–4903 Titre : Choice of low temperature salt for a resorption refrigerator Type de document : texte imprimé Auteurs : H. S. Bao, Auteur ; R.G. Oliveira, Auteur ; R.Z. Wang, Auteur Année de publication : 2010 Article en page(s) : pp. 4897–4903 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Mass refrigerant Résumé : Three bench-scale resorption systems were compared with respect to the degree of conversion, the specific cooling power, and the influence of the working condition on the temperature equilibrium drop. The mass of refrigerant that reacted during specified periods of each working condition studied was assessed gravimetrically. The three systems had MnCl2 in the main reactor, and they were designed to provide a cooling effect at 0 and at −5 °C. However, each system had a different salt (BaCl2, NaBr, or NH4Cl) in the reactor employed for cold production. The system with NH4Cl was the most suitable for cold production at the temperatures indicated above, whereas the system with BaCl2 was not suitable to operate at these levels of cooling production. Thus, we designed and manufactured a larger resorption system and assessed the feasibility of using this system to refrigerate a 33 L cold box, with two temperature zones. When the ambient temperature was 30 °C, the air temperature in the bottom of the cold box could be kept below 0 °C for 5 h, while the temperature of the upper zone remained below 6 °C for about 2.5 h. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901575k [article] Choice of low temperature salt for a resorption refrigerator [texte imprimé] / H. S. Bao, Auteur ; R.G. Oliveira, Auteur ; R.Z. Wang, Auteur . - 2010 . - pp. 4897–4903. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 49 N° 10 (Mai 2010) . - pp. 4897–4903 Mots-clés : Mass refrigerant Résumé : Three bench-scale resorption systems were compared with respect to the degree of conversion, the specific cooling power, and the influence of the working condition on the temperature equilibrium drop. The mass of refrigerant that reacted during specified periods of each working condition studied was assessed gravimetrically. The three systems had MnCl2 in the main reactor, and they were designed to provide a cooling effect at 0 and at −5 °C. However, each system had a different salt (BaCl2, NaBr, or NH4Cl) in the reactor employed for cold production. The system with NH4Cl was the most suitable for cold production at the temperatures indicated above, whereas the system with BaCl2 was not suitable to operate at these levels of cooling production. Thus, we designed and manufactured a larger resorption system and assessed the feasibility of using this system to refrigerate a 33 L cold box, with two temperature zones. When the ambient temperature was 30 °C, the air temperature in the bottom of the cold box could be kept below 0 °C for 5 h, while the temperature of the upper zone remained below 6 °C for about 2.5 h. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901575k

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire