Synthesis of carbonaceous poly(furfuryl alcohol) membrane for water desalination / Li He in Industrial & engineering chemistry research, Vol. 49 N° 9 (Mai 2010)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 49 N° 9 (Mai 2010) . - pp. 4175–4180 Titre : Synthesis of carbonaceous poly(furfuryl alcohol) membrane for water desalination Type de document : texte imprimé Auteurs : Li He, Auteur ; Li, Dan, Auteur ; Guangyou Zhang, Auteur Année de publication : 2010 Article en page(s) : pp. 4175–4180 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Water Desalination Résumé : A novel carbonaceous poly(furfuryl alcohol) (CPFA) membrane was fabricated by partially carbonizing a poly(furfuryl alcohol) (PFA) layer supported on a commercial polysulfone substrate with high-concentration sulfuric acid at room temperature. Gas permeation experiments suggested that the PFA membrane became microporous after sulfuric acid treatment. ATR-IR spectra showed that the furan structure of PFA was degraded by the high-concentration sulfuric acid, forming CPFA. As compared with the PFA membrane, the CPFA membrane exhibited significantly enhanced chlorine resistance and water desalination properties. The CPFA membrane had a salt rejection of around 93.3% and a water permeability of 1.54 L·μm·m−2·h−1·bar−1. After the chlorine treatment, the CPFA membrane exhibited a salt rejection of 73.7% and a water permeability of 2.01 L·μm·m−2·h−1·bar−1, whereas the PFA membrane had a salt rejection of only 60.1% and a water permeability of 0.17 L·μm·m−2·h−1·bar−1. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901886c [article] Synthesis of carbonaceous poly(furfuryl alcohol) membrane for water desalination [texte imprimé] / Li He, Auteur ; Li, Dan, Auteur ; Guangyou Zhang, Auteur . - 2010 . - pp. 4175–4180. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 49 N° 9 (Mai 2010) . - pp. 4175–4180 Mots-clés : Water Desalination Résumé : A novel carbonaceous poly(furfuryl alcohol) (CPFA) membrane was fabricated by partially carbonizing a poly(furfuryl alcohol) (PFA) layer supported on a commercial polysulfone substrate with high-concentration sulfuric acid at room temperature. Gas permeation experiments suggested that the PFA membrane became microporous after sulfuric acid treatment. ATR-IR spectra showed that the furan structure of PFA was degraded by the high-concentration sulfuric acid, forming CPFA. As compared with the PFA membrane, the CPFA membrane exhibited significantly enhanced chlorine resistance and water desalination properties. The CPFA membrane had a salt rejection of around 93.3% and a water permeability of 1.54 L·μm·m−2·h−1·bar−1. After the chlorine treatment, the CPFA membrane exhibited a salt rejection of 73.7% and a water permeability of 2.01 L·μm·m−2·h−1·bar−1, whereas the PFA membrane had a salt rejection of only 60.1% and a water permeability of 0.17 L·μm·m−2·h−1·bar−1. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901886c

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire