Fractional catalytic of hybrid poplar wood / Foster. A. Agblevor in Industrial & engineering chemistry research, Vol. 49 N° 8 (Avril 2010)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 49 N° 8 (Avril 2010) . - 3533-3537 P. Titre : Fractional catalytic of hybrid poplar wood Type de document : texte imprimé Auteurs : Foster. A. Agblevor, Auteur ; S. Beis, Auteur ; O. Mante, Auteur Année de publication : 2010 Article en page(s) : 3533-3537 P. Note générale : Industrial Chemistry Langues : Anglais (eng) Mots-clés : pyrolysis Fractional catalytic hybrid poplar wood Résumé : Fractional catalytic pyrolysis is a selective in situ conversion of biopolymers into desired products. Fractional catalytic pyrolysis was used to convert the lignin fraction of hybrid poplar wood into high yields of cresols and phenols while the carbohydrate fraction was selectively converted into gaseous products. Ground air-dried biomass was fractionally pyrolyzed at 450−500 °C in a 2-in fluidized bed reactor. The total liquid, gas, and char/coke yields were 33%, 53%, and 12.5%, respectively. The low viscosity liquid products consisted of almost pure phenolics with minor carbohydrate decomposition products. The major liquid components were phenol, cresols, methyl substituted phenols, and small fractions of indene and substituted naphthalenes. The carbon and oxygen contents and high heating value (HHV) of the oil were 71%, 21%, and 30.5 MJ/kg, respectively. About 90 wt % of the gaseous products was carbon monoxide and carbon dioxide, and the rest was a mixture of hydrocarbons. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901629r?prevSearch=Fractional%2Bcatalytic% [...] [article] Fractional catalytic of hybrid poplar wood [texte imprimé] / Foster. A. Agblevor, Auteur ; S. Beis, Auteur ; O. Mante, Auteur . - 2010 . - 3533-3537 P. Industrial Chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 49 N° 8 (Avril 2010) . - 3533-3537 P. Mots-clés : pyrolysis Fractional catalytic hybrid poplar wood Résumé : Fractional catalytic pyrolysis is a selective in situ conversion of biopolymers into desired products. Fractional catalytic pyrolysis was used to convert the lignin fraction of hybrid poplar wood into high yields of cresols and phenols while the carbohydrate fraction was selectively converted into gaseous products. Ground air-dried biomass was fractionally pyrolyzed at 450−500 °C in a 2-in fluidized bed reactor. The total liquid, gas, and char/coke yields were 33%, 53%, and 12.5%, respectively. The low viscosity liquid products consisted of almost pure phenolics with minor carbohydrate decomposition products. The major liquid components were phenol, cresols, methyl substituted phenols, and small fractions of indene and substituted naphthalenes. The carbon and oxygen contents and high heating value (HHV) of the oil were 71%, 21%, and 30.5 MJ/kg, respectively. About 90 wt % of the gaseous products was carbon monoxide and carbon dioxide, and the rest was a mixture of hydrocarbons. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901629r?prevSearch=Fractional%2Bcatalytic% [...]

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire