Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur Weijun Bao
Documents disponibles écrits par cet auteur
Affiner la rechercheSelective leaching of steelmaking slag for indirect CO2 mineral sequestration / Weijun Bao in Industrial & engineering chemistry research, Vol. 49 N° 5 (Mars 2010)
[article]
in Industrial & engineering chemistry research > Vol. 49 N° 5 (Mars 2010) . - pp. 2055–2063
Titre : Selective leaching of steelmaking slag for indirect CO2 mineral sequestration Type de document : texte imprimé Auteurs : Weijun Bao, Auteur ; Huiquan Li, Auteur ; Zhang, Yi, Auteur Année de publication : 2010 Article en page(s) : pp. 2055–2063 Note générale : Industrial Chemistry Langues : Anglais (eng) Mots-clés : CO2; Steelmaking; Lleaching; Calcium ions; Indirect CO2 mineral Résumé : Indirect CO2 mineral sequestration, which could make CO2 fixate into precipitated calcium carbonate (PCC) of value-added products, is an important technology that is used to reduce greenhouse gas emissions economically. It can be conducted in two steps, one of which has been investigated in the previous paper. In this work, extraction of calcium ions from steelmaking slag using a novel leaching medium, which involves organic solvent tributyl phosphate (TBP), acetic acid, and ultrapure water, was studied. Several operating variables, including stirring speed, phase-volume ratio, organic solvent-to-solid ratio, initial acetic acid concentration, acid-to-slag ratio, reaction temperature, and reaction time were investigated. It was found that the leaching process could be divided into three regions according to the acid-to-slag ratio. The first region below 0.5 g/g was characterized by the acid-to-solid ratio; the second region above 0.5 g/g but below 1.0 g/g was characterized by the acid-to-solid ratio; and the third region above 1.0 g/g was characterized by the acid-to-solid ratio. When the acid-to-solid ratio was below 1.0 g/g, only Ca and Mg could be leached with the maximum leached ratios of 75% and 35%, respectively. Moreover, the leaching behaviors of Ca, Mg, Fe, Al, and Si were greatly affected by reaction temperature and reaction time. Results show that the calcium ions can be effectively and selectively extracted from the steelmaking slag and that the reaction medium can be recovered and recycled with high efficiency. These are the keys to indirect CO2 mineral sequestration. Note de contenu : Bibliogr. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie801850s [article] Selective leaching of steelmaking slag for indirect CO2 mineral sequestration [texte imprimé] / Weijun Bao, Auteur ; Huiquan Li, Auteur ; Zhang, Yi, Auteur . - 2010 . - pp. 2055–2063.
Industrial Chemistry
Langues : Anglais (eng)
in Industrial & engineering chemistry research > Vol. 49 N° 5 (Mars 2010) . - pp. 2055–2063
Mots-clés : CO2; Steelmaking; Lleaching; Calcium ions; Indirect CO2 mineral Résumé : Indirect CO2 mineral sequestration, which could make CO2 fixate into precipitated calcium carbonate (PCC) of value-added products, is an important technology that is used to reduce greenhouse gas emissions economically. It can be conducted in two steps, one of which has been investigated in the previous paper. In this work, extraction of calcium ions from steelmaking slag using a novel leaching medium, which involves organic solvent tributyl phosphate (TBP), acetic acid, and ultrapure water, was studied. Several operating variables, including stirring speed, phase-volume ratio, organic solvent-to-solid ratio, initial acetic acid concentration, acid-to-slag ratio, reaction temperature, and reaction time were investigated. It was found that the leaching process could be divided into three regions according to the acid-to-slag ratio. The first region below 0.5 g/g was characterized by the acid-to-solid ratio; the second region above 0.5 g/g but below 1.0 g/g was characterized by the acid-to-solid ratio; and the third region above 1.0 g/g was characterized by the acid-to-solid ratio. When the acid-to-solid ratio was below 1.0 g/g, only Ca and Mg could be leached with the maximum leached ratios of 75% and 35%, respectively. Moreover, the leaching behaviors of Ca, Mg, Fe, Al, and Si were greatly affected by reaction temperature and reaction time. Results show that the calcium ions can be effectively and selectively extracted from the steelmaking slag and that the reaction medium can be recovered and recycled with high efficiency. These are the keys to indirect CO2 mineral sequestration. Note de contenu : Bibliogr. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie801850s