Wear rates and current distribution of carbon brushes on steel slip rings / Skjlberg, Johan K. in IEEE transactions on energy conversion, Vol. 24 N° 4 (Décembre 2009)  

Public ISBD [article]  inIEEE transactions on energy conversion > Vol. 24 N° 4 (Décembre 2009) . - pp. 835 - 840 Titre : Wear rates and current distribution of carbon brushes on steel slip rings Type de document : texte imprimé Auteurs : Skjlberg, Johan K., Auteur ; Ohma, Havar F., Auteur Année de publication : 2010 Article en page(s) : pp. 835 - 840 Note générale : energy conversion Langues : Anglais (eng) Mots-clés : Brushes  current distribution  hydroelectric generators  machine testing  wear Résumé : This paper deals with brush wear and current distribution of carbon brushes on steel slip rings. Measurements of brush wear and brush current have been carried out both in generators in service and in a laboratory test rig. Wear rates increase with increasing brush current only for positive brushes on-site, whereas an evident correlation between brush current and brush wear was found for both polarities in the laboratory. The magnetizing current is, in general, unevenly distributed between the brushes operating in parallel, and the current shifts between different brushes during operation. The current distribution becomes more uneven with increasing mean current density and with increasing circumferential velocity of the slip ring. En ligne : http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5336290&sortType%3Das [...] [article] Wear rates and current distribution of carbon brushes on steel slip rings [texte imprimé] / Skjlberg, Johan K., Auteur ; Ohma, Havar F., Auteur . - 2010 . - pp. 835 - 840. energy conversion Langues : Anglais (eng) in IEEE transactions on energy conversion > Vol. 24 N° 4 (Décembre 2009) . - pp. 835 - 840 Mots-clés : Brushes  current distribution  hydroelectric generators  machine testing  wear Résumé : This paper deals with brush wear and current distribution of carbon brushes on steel slip rings. Measurements of brush wear and brush current have been carried out both in generators in service and in a laboratory test rig. Wear rates increase with increasing brush current only for positive brushes on-site, whereas an evident correlation between brush current and brush wear was found for both polarities in the laboratory. The magnetizing current is, in general, unevenly distributed between the brushes operating in parallel, and the current shifts between different brushes during operation. The current distribution becomes more uneven with increasing mean current density and with increasing circumferential velocity of the slip ring. En ligne : http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5336290&sortType%3Das [...]

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire