The applicability of an existing fluted tube condenser model when used with refrigerant R-407C / M. van Eldik in International journal of refrigeration, Vol. 36 N° 8 (Décembre 2013)  

Public ISBD [article]  inInternational journal of refrigeration > Vol. 36 N° 8 (Décembre 2013) . - pp. 2379–2386 Titre : The applicability of an existing fluted tube condenser model when used with refrigerant R-407C Titre original : Applicabilité d'un modèle existant de condenseur à tube cannelé utilisé avec le frigorigène R-407C Type de document : texte imprimé Auteurs : M. van Eldik, Auteur ; G. Wessels, Auteur Année de publication : 2014 Article en page(s) : pp. 2379–2386 Note générale : Refrigeration Langues : Anglais (eng) Mots-clés : Condensation  fluted tube  heat pump  simulation model  R-407C Résumé : Fluted tube-in-tube condensers are key components in energy efficient water heating heat pumps. Rousseau et al. (2003) developed a model that incorporates all the essential features of these heat exchangers. A feature of the model was that it allowed for the extension to simulate heat exchangers for cycles employing zeotropic refrigerant mixtures. This paper investigates the applicability of the model for R-407C condensation inside fluted tube annuli. To evaluate the model experimental data was gathered using a test facility. Comparisons between the experimental results and the model showed an average model accuracy of 48% when predicting the pressure drop and 56% for the log mean temperature difference (LMTD) for the tubes sizes used. Based on these accuracies new enhancement factors were derived and implemented in the model. This resulted in an average difference between the simulated and measured pressure drops of 9.5% and an average difference for the LMTD of 3.3%. En ligne : http://www.sciencedirect.com/science/article/pii/S0140700713001631 [article] The applicability of an existing fluted tube condenser model when used with refrigerant R-407C = Applicabilité d'un modèle existant de condenseur à tube cannelé utilisé avec le frigorigène R-407C [texte imprimé] / M. van Eldik, Auteur ; G. Wessels, Auteur . - 2014 . - pp. 2379–2386. Refrigeration Langues : Anglais (eng) in International journal of refrigeration > Vol. 36 N° 8 (Décembre 2013) . - pp. 2379–2386 Mots-clés : Condensation  fluted tube  heat pump  simulation model  R-407C Résumé : Fluted tube-in-tube condensers are key components in energy efficient water heating heat pumps. Rousseau et al. (2003) developed a model that incorporates all the essential features of these heat exchangers. A feature of the model was that it allowed for the extension to simulate heat exchangers for cycles employing zeotropic refrigerant mixtures. This paper investigates the applicability of the model for R-407C condensation inside fluted tube annuli. To evaluate the model experimental data was gathered using a test facility. Comparisons between the experimental results and the model showed an average model accuracy of 48% when predicting the pressure drop and 56% for the log mean temperature difference (LMTD) for the tubes sizes used. Based on these accuracies new enhancement factors were derived and implemented in the model. This resulted in an average difference between the simulated and measured pressure drops of 9.5% and an average difference for the LMTD of 3.3%. En ligne : http://www.sciencedirect.com/science/article/pii/S0140700713001631

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire