Global modeling of heat and mass transfers in spiral tubular absorber of a water–lithium bromide absorption chiller / Nabil Ben Hafsia in International journal of refrigeration, Vol. 38 (Février 2014)  

Public ISBD [article]  inInternational journal of refrigeration > Vol. 38 (Février 2014) . - pp. 323–332 Titre : Global modeling of heat and mass transfers in spiral tubular absorber of a water–lithium bromide absorption chiller Titre original : Modélisation globale des transferts de chaleur et de masse dans l'absorbeur tubulaire en spirale d'un refroidisseur à bromure de lithium-eau Type de document : texte imprimé Auteurs : Nabil Ben Hafsia, Auteur ; Chaouachi, Bechir, Auteur ; Gabsi, Slimane, Auteur Année de publication : 2014 Article en page(s) : pp. 323–332 Note générale : Refrigeration Langues : Anglais (eng) Mots-clés : Absorption chiller  Linear and nonlinear models  Transfer coefficients  Coupled transfer  LMD method Résumé : In this work, a simplified nonlinear coupled model and a simplified linear coupled model are examined in order to determine the model that better approaches the global mass and heat transfers during water vapor absorption by a falling film of LiBr solution in a spiral tubular absorber of an absorption chiller. The linear coupled model gives up analytical expressions that are used to determine overall heat and mass transfer coefficients from the experimental measurements taken at the inlet and outlet of absorber. These coupled overall transfer coefficients are used with the uncoupled ones that are deduced from the LMD method to determine the simulated absorption parameters along the absorber area. The comparison between the two models based essentially on the different parameters values at the inlet and the outlet of the absorber shows that nonlinear model approaches better experimental results. It shows also that the use of overall coupled transfer coefficients is not significant at low solution flow rates usually encountered in absorption chiller application and therefore the use of the overall transfer coefficients extracted from LMD method approaches well experimental data. The nonlinear model which is the approved model points up that the absorbed water vapor quantity and the overall effective mass transfer coefficient for the spiral tubular absorber increase with decreasing cooling water temperatures. En ligne : http://www.sciencedirect.com/science/article/pii/S0140700713002739 [article] Global modeling of heat and mass transfers in spiral tubular absorber of a water–lithium bromide absorption chiller = Modélisation globale des transferts de chaleur et de masse dans l'absorbeur tubulaire en spirale d'un refroidisseur à bromure de lithium-eau [texte imprimé] / Nabil Ben Hafsia, Auteur ; Chaouachi, Bechir, Auteur ; Gabsi, Slimane, Auteur . - 2014 . - pp. 323–332. Refrigeration Langues : Anglais (eng) in International journal of refrigeration > Vol. 38 (Février 2014) . - pp. 323–332 Mots-clés : Absorption chiller  Linear and nonlinear models  Transfer coefficients  Coupled transfer  LMD method Résumé : In this work, a simplified nonlinear coupled model and a simplified linear coupled model are examined in order to determine the model that better approaches the global mass and heat transfers during water vapor absorption by a falling film of LiBr solution in a spiral tubular absorber of an absorption chiller. The linear coupled model gives up analytical expressions that are used to determine overall heat and mass transfer coefficients from the experimental measurements taken at the inlet and outlet of absorber. These coupled overall transfer coefficients are used with the uncoupled ones that are deduced from the LMD method to determine the simulated absorption parameters along the absorber area. The comparison between the two models based essentially on the different parameters values at the inlet and the outlet of the absorber shows that nonlinear model approaches better experimental results. It shows also that the use of overall coupled transfer coefficients is not significant at low solution flow rates usually encountered in absorption chiller application and therefore the use of the overall transfer coefficients extracted from LMD method approaches well experimental data. The nonlinear model which is the approved model points up that the absorbed water vapor quantity and the overall effective mass transfer coefficient for the spiral tubular absorber increase with decreasing cooling water temperatures. En ligne : http://www.sciencedirect.com/science/article/pii/S0140700713002739

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire