Documents disponibles écrits par cet auteur

Corrosion resistant performances of Al-rich epoxy resin based paint on arc-sprayed Al coating / Z. Wang in Materials and corrosion, Vol. 61 N° 2 (Fevrier 2010) 

Public ISBD [article]  in Materials and corrosion > Vol. 61 N° 2 (Fevrier 2010) . - pp. 152–156 Titre : Corrosion resistant performances of Al-rich epoxy resin based paint on arc-sprayed Al coating Type de document : texte imprimé Auteurs : Z. Wang, Auteur ; L. M. Liu, Auteur Année de publication : 2010 Article en page(s) : pp. 152–156 Note générale : Génie mécanique Langues : Anglais (eng) Mots-clés : Al-rich  epoxy  resin  based  paint;  coatings;  corrosion  resistance;  penetration Résumé : Electrical conductive Al-rich epoxy resin based paint with an acceptable surface was for the first time prepared on an arc-sprayed aluminium coating surface successfully. Adhesion test and salt solution immersion test (SSIT) with complementary measurements including electron probe microanalysis (EPMA) and Raman spectroscopy were employed. Adhesion properties of the epoxy resin pigmented with Al particles did not degrade. Besides, because of the close Al particle–resin integration and the tight adhesion in the paint–coating interface, the strong adherence of corrosion products on Al particles, as well as probable passivation of Al particles, the paint showed no worse corrosion resistance properties than the epoxy resin and corroded at a similar rate to the epoxy resin, uniformly, slowly and slightly, protecting the coating base as a barrier type film. En ligne : http://onlinelibrary.wiley.com/doi/10.1002/maco.200905242/abstract [article] Corrosion resistant performances of Al-rich epoxy resin based paint on arc-sprayed Al coating [texte imprimé] / Z. Wang, Auteur ; L. M. Liu, Auteur . - 2010 . - pp. 152–156. Génie mécanique Langues : Anglais (eng) in Materials and corrosion > Vol. 61 N° 2 (Fevrier 2010) . - pp. 152–156 Mots-clés : Al-rich  epoxy  resin  based  paint;  coatings;  corrosion  resistance;  penetration Résumé : Electrical conductive Al-rich epoxy resin based paint with an acceptable surface was for the first time prepared on an arc-sprayed aluminium coating surface successfully. Adhesion test and salt solution immersion test (SSIT) with complementary measurements including electron probe microanalysis (EPMA) and Raman spectroscopy were employed. Adhesion properties of the epoxy resin pigmented with Al particles did not degrade. Besides, because of the close Al particle–resin integration and the tight adhesion in the paint–coating interface, the strong adherence of corrosion products on Al particles, as well as probable passivation of Al particles, the paint showed no worse corrosion resistance properties than the epoxy resin and corroded at a similar rate to the epoxy resin, uniformly, slowly and slightly, protecting the coating base as a barrier type film. En ligne : http://onlinelibrary.wiley.com/doi/10.1002/maco.200905242/abstract