Documents disponibles écrits par cet auteur

Novel multiflux level, three-phase, squirrel-cage induction motor for efficiency and power factor maximization / Ferreira, F.J.T.E. in IEEE transactions on energy conversion, Vol. 23 N°1 (Mars 2008) 

Public ISBD [article]  in IEEE transactions on energy conversion > Vol. 23 N°1 (Mars 2008) . - pp. 101 - 109 Titre : Novel multiflux level, three-phase, squirrel-cage induction motor for efficiency and power factor maximization Type de document : texte imprimé Auteurs : Ferreira, F.J.T.E., Auteur ; de Almeida, A.T., Auteur Année de publication : 2008 Article en page(s) : pp. 101 - 109 Note générale : Energy conversion Langues : Anglais (eng) Mots-clés : Power  factor;  squirrel  cage  motors;  stators Résumé : In the European Union, the average load factor of electric motors in both industrial and tertiary sectors is estimated to be less than 60%. However, in some industrial sectors, the average load factor for some motor power ranges can be as low as 25%. Most oversized three-phase induction motors operate with low efficiency and power factor, which is, by far, the most important cause for poor power factor in industrial installations. In the low-load operating periods, motor performance can be improved both in terms of efficiency and power factor if the magnetizing flux is properly regulated. In this paper, a multiflux level, three-phase, squirrel-cage induction motor is proposed, in which the efficiency and power factor can be both maximized as a function of load. This novel motor can be a surplus value in industry due to its flexibility, particularly, for variable load applications in which significant energy savings can be obtained, and can also be used as new or rewound general purpose spare motor (with several levels of voltage, magnetizing flux and/or power). The proposed motor has a stator winding with two sets of turns, sharing the same positions in the stator slots (which can be connected either in series or in parallel). Among all the possible stator winding connections, six modes were selected and analyzed (two of which are new). The basic principles for proper connection mode change are discussed. An electronic device and a contactor concept for automatic connection mode change are proposed. As far as the authors know, this concept is described and analyzed for the first time. En ligne : http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=4453984&sortType%3Das [...] [article] Novel multiflux level, three-phase, squirrel-cage induction motor for efficiency and power factor maximization [texte imprimé] / Ferreira, F.J.T.E., Auteur ; de Almeida, A.T., Auteur . - 2008 . - pp. 101 - 109. Energy conversion Langues : Anglais (eng) in IEEE transactions on energy conversion > Vol. 23 N°1 (Mars 2008) . - pp. 101 - 109 Mots-clés : Power  factor;  squirrel  cage  motors;  stators Résumé : In the European Union, the average load factor of electric motors in both industrial and tertiary sectors is estimated to be less than 60%. However, in some industrial sectors, the average load factor for some motor power ranges can be as low as 25%. Most oversized three-phase induction motors operate with low efficiency and power factor, which is, by far, the most important cause for poor power factor in industrial installations. In the low-load operating periods, motor performance can be improved both in terms of efficiency and power factor if the magnetizing flux is properly regulated. In this paper, a multiflux level, three-phase, squirrel-cage induction motor is proposed, in which the efficiency and power factor can be both maximized as a function of load. This novel motor can be a surplus value in industry due to its flexibility, particularly, for variable load applications in which significant energy savings can be obtained, and can also be used as new or rewound general purpose spare motor (with several levels of voltage, magnetizing flux and/or power). The proposed motor has a stator winding with two sets of turns, sharing the same positions in the stator slots (which can be connected either in series or in parallel). Among all the possible stator winding connections, six modes were selected and analyzed (two of which are new). The basic principles for proper connection mode change are discussed. An electronic device and a contactor concept for automatic connection mode change are proposed. As far as the authors know, this concept is described and analyzed for the first time. En ligne : http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=4453984&sortType%3Das [...]