Hydrodynamic characterization of a nozzle check valve by numerical simulation / Stefano Sibilla in Transactions of the ASME . Journal of fluids engineering, Vol. 130 N° 12 (Décembre 2008)  

Public ISBD [article]  inTransactions of the ASME . Journal of fluids engineering > Vol. 130 N° 12 (Décembre 2008) . - 12 p. Titre : Hydrodynamic characterization of a nozzle check valve by numerical simulation Type de document : texte imprimé Auteurs : Stefano Sibilla, Auteur ; Mario Gallati, Auteur Année de publication : 2009 Article en page(s) : 12 p. Note générale : Fluids engineering Langues : Anglais (eng) Mots-clés : Flow (Dynamics)  turbulence  valves  pressure drop  computer simulation  nozzles Résumé : The ability to obtain correct estimates of the hydraulic characteristics of a nozzle check valve by finite-volume numerical simulation is discussed. The evaluation of the numerical results is performed by comparison of the computed pressure drops inside the valve with experimental measurements obtained on an industrial check valve. It is shown that, even with high mesh refinement, the obtained result is highly dependent on the choice of the turbulence model. The renormalization group theory (RNG) k-ε model proves to be the more accurate to describe the flow inside the valve, which is characterized by repeated flow decelerations and accelerations and by boundary layer development under adverse pressure gradient. Pressure-drop and flow coefficients computed by adopting the RNG model agree well with the experimental values at different positions of the plug. The opening transient of the valve is also analyzed by an unsteady flow simulation where the motion of the plug is taken into account. The characteristic curve of the valve obtained in steady flow conditions is finally compared with the transient opening characteristic, highlighting a temporary increase in the pressure drop, which occurs because of a large unsteady separation region downstream of the plug. En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/Issue.aspx?issueID=27349 [...] [article] Hydrodynamic characterization of a nozzle check valve by numerical simulation [texte imprimé] / Stefano Sibilla, Auteur ; Mario Gallati, Auteur . - 2009 . - 12 p. Fluids engineering Langues : Anglais (eng) in Transactions of the ASME . Journal of fluids engineering > Vol. 130 N° 12 (Décembre 2008) . - 12 p. Mots-clés : Flow (Dynamics)  turbulence  valves  pressure drop  computer simulation  nozzles Résumé : The ability to obtain correct estimates of the hydraulic characteristics of a nozzle check valve by finite-volume numerical simulation is discussed. The evaluation of the numerical results is performed by comparison of the computed pressure drops inside the valve with experimental measurements obtained on an industrial check valve. It is shown that, even with high mesh refinement, the obtained result is highly dependent on the choice of the turbulence model. The renormalization group theory (RNG) k-ε model proves to be the more accurate to describe the flow inside the valve, which is characterized by repeated flow decelerations and accelerations and by boundary layer development under adverse pressure gradient. Pressure-drop and flow coefficients computed by adopting the RNG model agree well with the experimental values at different positions of the plug. The opening transient of the valve is also analyzed by an unsteady flow simulation where the motion of the plug is taken into account. The characteristic curve of the valve obtained in steady flow conditions is finally compared with the transient opening characteristic, highlighting a temporary increase in the pressure drop, which occurs because of a large unsteady separation region downstream of the plug. En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/Issue.aspx?issueID=27349 [...]

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire