Documents disponibles écrits par cet auteur

Characterization of air flow through sintered metal foams / Oliver Reutter in Transactions of the ASME . Journal of fluids engineering, Vol. 130 N° 5 (Mai 2008) 

Public ISBD [article]  in Transactions of the ASME . Journal of fluids engineering > Vol. 130 N° 5 (Mai 2008) . - 5 p. Titre : Characterization of air flow through sintered metal foams Type de document : texte imprimé Auteurs : Oliver Reutter, Auteur ; Elena Smirnova, Auteur ; Jörg Sauerhering, Auteur Année de publication : 2009 Article en page(s) : 5 p. Note générale : Fluids engineering Langues : Anglais (eng) Mots-clés : Density;  pressure;  flow  (dynamics);  permeability;  measurement;  air  flow;  metal  foams;  porosity;  pressure  drop;  foams  (chemistry);  sintering;  temperature;  porous  materials;  gravity  (force) Résumé : This study investigates air flow in metallic foams, which are produced by the slip reaction foam sintering (SRFS) process. It was conducted as part of the collaborative research center (SFB) 561 “Thermally Highly Loaded, Porous and Cooled Multi-Layer Systems for Combined Cycle Power Plants.” The flow through a porous medium is analyzed by Darcy’s equation with the Dupuit/Forchheimer extension. All measurements can be described very well by this equation and permeability and inertial coefficients are obtained for a large quantity of samples with different base materials and different porosities. A threshold porosity of 70% is observed, above which the pressure loss significantly starts sinking with porosity. Additionally, it was found that the permeability was anisotropic. Permeability is lower in the direction of gravity during foaming. Scattering in the data of the permeability and inertial coefficients versus the porosity is observed and discussed. En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/issue.aspx?journalid=122 [...] [article] Characterization of air flow through sintered metal foams [texte imprimé] / Oliver Reutter, Auteur ; Elena Smirnova, Auteur ; Jörg Sauerhering, Auteur . - 2009 . - 5 p. Fluids engineering Langues : Anglais (eng) in Transactions of the ASME . Journal of fluids engineering > Vol. 130 N° 5 (Mai 2008) . - 5 p. Mots-clés : Density;  pressure;  flow  (dynamics);  permeability;  measurement;  air  flow;  metal  foams;  porosity;  pressure  drop;  foams  (chemistry);  sintering;  temperature;  porous  materials;  gravity  (force) Résumé : This study investigates air flow in metallic foams, which are produced by the slip reaction foam sintering (SRFS) process. It was conducted as part of the collaborative research center (SFB) 561 “Thermally Highly Loaded, Porous and Cooled Multi-Layer Systems for Combined Cycle Power Plants.” The flow through a porous medium is analyzed by Darcy’s equation with the Dupuit/Forchheimer extension. All measurements can be described very well by this equation and permeability and inertial coefficients are obtained for a large quantity of samples with different base materials and different porosities. A threshold porosity of 70% is observed, above which the pressure loss significantly starts sinking with porosity. Additionally, it was found that the permeability was anisotropic. Permeability is lower in the direction of gravity during foaming. Scattering in the data of the permeability and inertial coefficients versus the porosity is observed and discussed. En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/issue.aspx?journalid=122 [...]