Documents disponibles écrits par cet auteur

Synthesis and characterization of caO nanopods for high temperature CO2 capture / Zeheng Yang in Industrial & engineering chemistry research, Vol. 48 N° 24 (Décembre 2009) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 48 N° 24 (Décembre 2009) . - pp. 10765–10770 Titre : Synthesis and characterization of caO nanopods for high temperature CO2 capture Type de document : texte imprimé Auteurs : Zeheng Yang, Auteur ; Ming Zhao, Auteur ; Nicholas H. Florin, Auteur Année de publication : 2010 Article en page(s) : pp. 10765–10770 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Synthesis  and  Characterization  of  CaO  Nanopods  for  High  Temperature  CO2  Capture Résumé : A hollow structured CaO sorbent with high CO2 absorption capacity and good cyclic performance at high temperatures was derived from the corresponding CaCO3 precursor, which was prepared by bubbling gaseous CO2 through a Ca(OH)2 slurry in the presence of the triblock copolymer surfactant, P123 (PEO20PPO70PEO20). Field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) images showed the novel sorbent to be comprised of nanosized platelets forming hollow particles resembling a pod of approximately 200 nm in diameter and up to 600 nm in length. Thermogravimetric analysis showed that the tailored sorbent had the highest CO2 absorption capacity when compared with calcines derived from precipitated CaCO3 without P123 and a commercially available CaCO3, retaining >50% CO2 absorption capacity after 50 CO2 capture-and-release cycles for carbonation temperatures from 600 to 700 °C. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901137s [article] Synthesis and characterization of caO nanopods for high temperature CO2 capture [texte imprimé] / Zeheng Yang, Auteur ; Ming Zhao, Auteur ; Nicholas H. Florin, Auteur . - 2010 . - pp. 10765–10770. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 48 N° 24 (Décembre 2009) . - pp. 10765–10770 Mots-clés : Synthesis  and  Characterization  of  CaO  Nanopods  for  High  Temperature  CO2  Capture Résumé : A hollow structured CaO sorbent with high CO2 absorption capacity and good cyclic performance at high temperatures was derived from the corresponding CaCO3 precursor, which was prepared by bubbling gaseous CO2 through a Ca(OH)2 slurry in the presence of the triblock copolymer surfactant, P123 (PEO20PPO70PEO20). Field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) images showed the novel sorbent to be comprised of nanosized platelets forming hollow particles resembling a pod of approximately 200 nm in diameter and up to 600 nm in length. Thermogravimetric analysis showed that the tailored sorbent had the highest CO2 absorption capacity when compared with calcines derived from precipitated CaCO3 without P123 and a commercially available CaCO3, retaining >50% CO2 absorption capacity after 50 CO2 capture-and-release cycles for carbonation temperatures from 600 to 700 °C. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901137s

Synthesis and characterization of CaO nanopods for high temperature CO2 capture / Zeheng Yang in Industrial & engineering chemistry research, Vol. 48 N° 24 (Décembre 2009) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 48 N° 24 (Décembre 2009) . - pp. 10765–10770 Titre : Synthesis and characterization of CaO nanopods for high temperature CO2 capture Type de document : texte imprimé Auteurs : Zeheng Yang, Auteur ; Ming Zhao, Auteur ; Nicholas H. Florin, Auteur Année de publication : 2010 Article en page(s) : pp. 10765–10770 Note générale : Chemical engineering Langues : Anglais (eng) Mots-clés : CaO  sorbent  CO2  absorption  Good  cyclic  performance Résumé : A hollow structured CaO sorbent with high CO2 absorption capacity and good cyclic performance at high temperatures was derived from the corresponding CaCO3 precursor, which was prepared by bubbling gaseous CO2 through a Ca(OH)2 slurry in the presence of the triblock copolymer surfactant, P123 (PEO20PPO70PEO20). Field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) images showed the novel sorbent to be comprised of nanosized platelets forming hollow particles resembling a pod of approximately 200 nm in diameter and up to 600 nm in length. Thermogravimetric analysis showed that the tailored sorbent had the highest CO2 absorption capacity when compared with calcines derived from precipitated CaCO3 without P123 and a commercially available CaCO3, retaining >50% CO2 absorption capacity after 50 CO2 capture-and-release cycles for carbonation temperatures from 600 to 700 °C. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901137s [article] Synthesis and characterization of CaO nanopods for high temperature CO2 capture [texte imprimé] / Zeheng Yang, Auteur ; Ming Zhao, Auteur ; Nicholas H. Florin, Auteur . - 2010 . - pp. 10765–10770. Chemical engineering Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 48 N° 24 (Décembre 2009) . - pp. 10765–10770 Mots-clés : CaO  sorbent  CO2  absorption  Good  cyclic  performance Résumé : A hollow structured CaO sorbent with high CO2 absorption capacity and good cyclic performance at high temperatures was derived from the corresponding CaCO3 precursor, which was prepared by bubbling gaseous CO2 through a Ca(OH)2 slurry in the presence of the triblock copolymer surfactant, P123 (PEO20PPO70PEO20). Field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) images showed the novel sorbent to be comprised of nanosized platelets forming hollow particles resembling a pod of approximately 200 nm in diameter and up to 600 nm in length. Thermogravimetric analysis showed that the tailored sorbent had the highest CO2 absorption capacity when compared with calcines derived from precipitated CaCO3 without P123 and a commercially available CaCO3, retaining >50% CO2 absorption capacity after 50 CO2 capture-and-release cycles for carbonation temperatures from 600 to 700 °C. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901137s