Documents disponibles écrits par cet auteur

Selective hydrogenation of maleic anhydride to tetrahydrofuran over Cu−Zn−M (M = Al, Ti, Zr) catalysts using ethanol as a solvent / Dongzhi Zhang in Industrial & engineering chemistry research, Vol. 48 N° 24 (Décembre 2009) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 48 N° 24 (Décembre 2009) . - pp. 11220–11224 Titre : Selective hydrogenation of maleic anhydride to tetrahydrofuran over Cu−Zn−M (M = Al, Ti, Zr) catalysts using ethanol as a solvent Type de document : texte imprimé Auteurs : Dongzhi Zhang, Auteur ; Hengbo Yin, Auteur ; Jinjuan Xue, Auteur Année de publication : 2010 Article en page(s) : pp. 11220–11224 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Selective--Hydrogenation--Maleic--Anhydride--Tetrahydrofuran--Cu−Zn−M  (M  =  Al,  Ti,  Zr)--Catalysts--Using  Ethanol--Solvent Résumé : A series of Cu−Zn−M (M = Al, Ti, Zr) catalysts were prepared by coprecipitation method and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, and N2 adsorption. The catalytic activity of the Cu−Zn−M catalyst in maleic anhydride hydrogenation using ethanol as a solvent was studied at 220−280 °C and 1 MPa. The presence of MxOy in Cu−Zn−M (M = Al, Ti, Zr) catalysts favored the deep hydrogenation of maleic anhydride to tetrahydrofuran. The catalysts using TiO2 as a support showed the highest selectivity of tetrahydrofuran. The catalytic activity of the catalysts in the hydrogenation of maleic anhydride to tetrahydrofuran followed a sequence of Cu−Zn−Ti > Cu−Zn−Zr ≈ Cu−Zn−Al. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie9013875 [article] Selective hydrogenation of maleic anhydride to tetrahydrofuran over Cu−Zn−M (M = Al, Ti, Zr) catalysts using ethanol as a solvent [texte imprimé] / Dongzhi Zhang, Auteur ; Hengbo Yin, Auteur ; Jinjuan Xue, Auteur . - 2010 . - pp. 11220–11224. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 48 N° 24 (Décembre 2009) . - pp. 11220–11224 Mots-clés : Selective--Hydrogenation--Maleic--Anhydride--Tetrahydrofuran--Cu−Zn−M  (M  =  Al,  Ti,  Zr)--Catalysts--Using  Ethanol--Solvent Résumé : A series of Cu−Zn−M (M = Al, Ti, Zr) catalysts were prepared by coprecipitation method and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, and N2 adsorption. The catalytic activity of the Cu−Zn−M catalyst in maleic anhydride hydrogenation using ethanol as a solvent was studied at 220−280 °C and 1 MPa. The presence of MxOy in Cu−Zn−M (M = Al, Ti, Zr) catalysts favored the deep hydrogenation of maleic anhydride to tetrahydrofuran. The catalysts using TiO2 as a support showed the highest selectivity of tetrahydrofuran. The catalytic activity of the catalysts in the hydrogenation of maleic anhydride to tetrahydrofuran followed a sequence of Cu−Zn−Ti > Cu−Zn−Zr ≈ Cu−Zn−Al. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie9013875

Selective hydrogenation of maleic anhydride to tetrahydrofuran over Cu−Zn−M (M = Al, Ti, Zr) catalysts using ethanol as a solvent / Dongzhi Zhang in Industrial & engineering chemistry research, Vol. 48 N° 24 (Décembre 2009) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 48 N° 24 (Décembre 2009) . - pp. 11220–11224 Titre : Selective hydrogenation of maleic anhydride to tetrahydrofuran over Cu−Zn−M (M = Al, Ti, Zr) catalysts using ethanol as a solvent Type de document : texte imprimé Auteurs : Dongzhi Zhang, Auteur ; Hengbo Yin, Auteur ; Jinjuan Xue, Auteur Année de publication : 2010 Article en page(s) : pp. 11220–11224 Note générale : Chemical engineering Langues : Anglais (eng) Mots-clés : Cu−Zn−M  catalysts  Ethanol Résumé : A series of Cu−Zn−M (M = Al, Ti, Zr) catalysts were prepared by coprecipitation method and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, and N2 adsorption. The catalytic activity of the Cu−Zn−M catalyst in maleic anhydride hydrogenation using ethanol as a solvent was studied at 220−280 °C and 1 MPa. The presence of MxOy in Cu−Zn−M (M = Al, Ti, Zr) catalysts favored the deep hydrogenation of maleic anhydride to tetrahydrofuran. The catalysts using TiO2 as a support showed the highest selectivity of tetrahydrofuran. The catalytic activity of the catalysts in the hydrogenation of maleic anhydride to tetrahydrofuran followed a sequence of Cu−Zn−Ti > Cu−Zn−Zr ≈ Cu−Zn−Al. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie9013875 [article] Selective hydrogenation of maleic anhydride to tetrahydrofuran over Cu−Zn−M (M = Al, Ti, Zr) catalysts using ethanol as a solvent [texte imprimé] / Dongzhi Zhang, Auteur ; Hengbo Yin, Auteur ; Jinjuan Xue, Auteur . - 2010 . - pp. 11220–11224. Chemical engineering Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 48 N° 24 (Décembre 2009) . - pp. 11220–11224 Mots-clés : Cu−Zn−M  catalysts  Ethanol Résumé : A series of Cu−Zn−M (M = Al, Ti, Zr) catalysts were prepared by coprecipitation method and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, and N2 adsorption. The catalytic activity of the Cu−Zn−M catalyst in maleic anhydride hydrogenation using ethanol as a solvent was studied at 220−280 °C and 1 MPa. The presence of MxOy in Cu−Zn−M (M = Al, Ti, Zr) catalysts favored the deep hydrogenation of maleic anhydride to tetrahydrofuran. The catalysts using TiO2 as a support showed the highest selectivity of tetrahydrofuran. The catalytic activity of the catalysts in the hydrogenation of maleic anhydride to tetrahydrofuran followed a sequence of Cu−Zn−Ti > Cu−Zn−Zr ≈ Cu−Zn−Al. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie9013875