Performance of two-equation turbulence models for flat plate flows with leading edge bubbles / S. Collie in Transactions of the ASME . Journal of fluids engineering, Vol. 130 N° 2 (Fevrier 2008)  

Public ISBD [article]  inTransactions of the ASME . Journal of fluids engineering > Vol. 130 N° 2 (Fevrier 2008) . - 11 p. Titre : Performance of two-equation turbulence models for flat plate flows with leading edge bubbles Type de document : texte imprimé Auteurs : S. Collie, Auteur ; M. Gerritsen, Auteur ; P. Jackson, Auteur Année de publication : 2009 Article en page(s) : 11 p. Note générale : Fluids engineering Langues : Anglais (eng) Mots-clés : Shear (mechanics)  bubbles  boundary layers  flow (dynamics)  turbulence  flat plates  computational fluid dynamics  kinetic energy  equations Résumé : This paper investigates the performance of the popular k-ω and SST turbulence models for the two-dimensional flow past the flat plate at shallow angles of incidence. Particular interest is paid to the leading edge bubble that forms as the flow separates from the sharp leading edge. This type of leading edge bubble is most commonly found in flows past thin airfoils, such as turbine blades, membrane wings, and yacht sails. Validation is carried out through a comparison to wind tunnel results compiled by Crompton (2001, “The Thin Aerofoil Leading Edge Bubble, ” Ph.D. thesis, University of Bristol). This flow problem presents a new and demanding test case for turbulence models. The models were found to capture the leading edge bubble well with the Shear-Stress Transport (SST) model predicting the reattachment length within 7% of the experimental values. Downstream of reattachment both models predicted a slower boundary layer recovery than the experimental results. Overall, despite their simplicity, these two-equation models do a surprisingly good job for this demanding test case. En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/issue.aspx?journalid=122 [...] [article] Performance of two-equation turbulence models for flat plate flows with leading edge bubbles [texte imprimé] / S. Collie, Auteur ; M. Gerritsen, Auteur ; P. Jackson, Auteur . - 2009 . - 11 p. Fluids engineering Langues : Anglais (eng) in Transactions of the ASME . Journal of fluids engineering > Vol. 130 N° 2 (Fevrier 2008) . - 11 p. Mots-clés : Shear (mechanics)  bubbles  boundary layers  flow (dynamics)  turbulence  flat plates  computational fluid dynamics  kinetic energy  equations Résumé : This paper investigates the performance of the popular k-ω and SST turbulence models for the two-dimensional flow past the flat plate at shallow angles of incidence. Particular interest is paid to the leading edge bubble that forms as the flow separates from the sharp leading edge. This type of leading edge bubble is most commonly found in flows past thin airfoils, such as turbine blades, membrane wings, and yacht sails. Validation is carried out through a comparison to wind tunnel results compiled by Crompton (2001, “The Thin Aerofoil Leading Edge Bubble, ” Ph.D. thesis, University of Bristol). This flow problem presents a new and demanding test case for turbulence models. The models were found to capture the leading edge bubble well with the Shear-Stress Transport (SST) model predicting the reattachment length within 7% of the experimental values. Downstream of reattachment both models predicted a slower boundary layer recovery than the experimental results. Overall, despite their simplicity, these two-equation models do a surprisingly good job for this demanding test case. En ligne : http://fluidsengineering.asmedigitalcollection.asme.org/issue.aspx?journalid=122 [...]

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire