Influence of water quality on the efficiency of retention aids systems for the paper industry / Ruth Ordóñez in Industrial & engineering chemistry research, Vol. 48 N° 23 (Décembre 2009)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 48 N° 23 (Décembre 2009) . - pp. 10247–10252 Titre : Influence of water quality on the efficiency of retention aids systems for the paper industry Type de document : texte imprimé Auteurs : Ruth Ordóñez, Auteur ; Daphne Hermosilla, Auteur ; Elena de la Fuente, Auteur Année de publication : 2010 Article en page(s) : pp. 10247–10252 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Influence--Water--Quality--Efficiency--Retention--Systems--Paper--Industry Résumé : It has been reported that about 10−15% of the fresh water intake in a paper mill is used for feeding and diluting retention aids, so significant savings could be achieved by replacing fresh water with process water. Water from different sources and qualities—fresh water, the outflow from an internal ultrafiltration placed in the machine circuit of a paper mill, and water from a membrane bioreactor used to treat the final effluent of this paper mill—were used to prepare a dual retention system consisting of a cationic polyacrylamide and bentonite. While the behavior of bentonite was not significantly affected by the quality of the water used in its preparation, the efficiency of the cationic polyacrylamide was reduced to about 12% when it was prepared with water with high anionic trash content and conductivity as a result of a partial neutralization of the charged groups. The effect of nonionic chemical oxygen demand on the efficiency of the polymer was negligible. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie9010029 [article] Influence of water quality on the efficiency of retention aids systems for the paper industry [texte imprimé] / Ruth Ordóñez, Auteur ; Daphne Hermosilla, Auteur ; Elena de la Fuente, Auteur . - 2010 . - pp. 10247–10252. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 48 N° 23 (Décembre 2009) . - pp. 10247–10252 Mots-clés : Influence--Water--Quality--Efficiency--Retention--Systems--Paper--Industry Résumé : It has been reported that about 10−15% of the fresh water intake in a paper mill is used for feeding and diluting retention aids, so significant savings could be achieved by replacing fresh water with process water. Water from different sources and qualities—fresh water, the outflow from an internal ultrafiltration placed in the machine circuit of a paper mill, and water from a membrane bioreactor used to treat the final effluent of this paper mill—were used to prepare a dual retention system consisting of a cationic polyacrylamide and bentonite. While the behavior of bentonite was not significantly affected by the quality of the water used in its preparation, the efficiency of the cationic polyacrylamide was reduced to about 12% when it was prepared with water with high anionic trash content and conductivity as a result of a partial neutralization of the charged groups. The effect of nonionic chemical oxygen demand on the efficiency of the polymer was negligible. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie9010029

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire