Calibration of reliability-based resistance factors for flush drilled soil anchors in Taipei basin / Jianye Ching in Journal of geotechnical and geoenvironmental engineering, Vol. 134 n°9 (Septembre 2008)  

Public ISBD [article]  inJournal of geotechnical and geoenvironmental engineering > Vol. 134 n°9 (Septembre 2008) . - pp. 1348-1363 Titre : Calibration of reliability-based resistance factors for flush drilled soil anchors in Taipei basin Type de document : texte imprimé Auteurs : Jianye Ching, Auteur ; Hung-Jiun Liao, Auteur ; Chia-Wei Sue, Auteur Année de publication : 2008 Article en page(s) : pp. 1348-1363 Note générale : Geotechnical and geoenvironmental engineering Langues : Anglais (eng) Mots-clés : Anchors Pull-out resistance Safety factors Taiwan Calibration Drilling Résumé : The goal of this research is to calibrate the reliability-based resistance factor of flush drilled soil anchors for their ultimate pullout capacities based on in situ anchor pullout test data in the alluvial soil underlying the Taipei Basin. Efforts are taken to quantify the uncertainties with a full probabilistic analysis approach. The resistance factor is calibrated based on the in situ test results of 46 anchors with a rigorous theoretical approach which constructs the relationship between the resistance factor and failure probability. With this relationship, the reliability corresponding to the code regulation can be verified. From the results of the analysis, it is found that the borehole enlargement due to the flush drilling is quite significant: the actual diameter of the fixed anchor end may be much larger than the nominal diameter of the drilling casing. Consequently, the safety factor of 3.0, recommended by most anchor codes, is found to be too conservative. The results should be valuable for reliability-based design of flush drilled soil anchors in the Taipei Basin. En ligne : http://ascelibrary.org/doi/abs/10.1061/%28ASCE%291090-0241%282008%29134%3A9%2813 [...] [article] Calibration of reliability-based resistance factors for flush drilled soil anchors in Taipei basin [texte imprimé] / Jianye Ching, Auteur ; Hung-Jiun Liao, Auteur ; Chia-Wei Sue, Auteur . - 2008 . - pp. 1348-1363. Geotechnical and geoenvironmental engineering Langues : Anglais (eng) in Journal of geotechnical and geoenvironmental engineering > Vol. 134 n°9 (Septembre 2008) . - pp. 1348-1363 Mots-clés : Anchors Pull-out resistance Safety factors Taiwan Calibration Drilling Résumé : The goal of this research is to calibrate the reliability-based resistance factor of flush drilled soil anchors for their ultimate pullout capacities based on in situ anchor pullout test data in the alluvial soil underlying the Taipei Basin. Efforts are taken to quantify the uncertainties with a full probabilistic analysis approach. The resistance factor is calibrated based on the in situ test results of 46 anchors with a rigorous theoretical approach which constructs the relationship between the resistance factor and failure probability. With this relationship, the reliability corresponding to the code regulation can be verified. From the results of the analysis, it is found that the borehole enlargement due to the flush drilling is quite significant: the actual diameter of the fixed anchor end may be much larger than the nominal diameter of the drilling casing. Consequently, the safety factor of 3.0, recommended by most anchor codes, is found to be too conservative. The results should be valuable for reliability-based design of flush drilled soil anchors in the Taipei Basin. En ligne : http://ascelibrary.org/doi/abs/10.1061/%28ASCE%291090-0241%282008%29134%3A9%2813 [...]

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire