The effect of cementite size and morphology on the abrasive wear behavior of UHC steel / Niyazi Ozdemir in Transactions of the ASME . Journal of tribology, Vol. 130 n°2 (Mars/Avril 2008)  

Public ISBD [article]  inTransactions of the ASME . Journal of tribology > Vol. 130 n°2 (Mars/Avril 2008) . - 5 p. Titre : The effect of cementite size and morphology on the abrasive wear behavior of UHC steel Type de document : texte imprimé Auteurs : Niyazi Ozdemir, Auteur ; Furkan Sarsilmaz, Auteur ; Nuri Orhan, Auteur Année de publication : 2008 Article en page(s) : 5 p. Note générale : Tribology Langues : Anglais (eng) Résumé : In this study, the abrasive wear behavior of a grain refined hypereutectoid carbon steel containing 1.2% C, 4% Al, 0.20% Mo, and 0.1% Ti was investigated experimentally. Thermal cycles were applied to all specimens about ten times to obtain a fine-grained structure and to gain more softness structures, such as spheroidized cementite for these steels. After every thermal cycle, the microstructures of specimens were examined by scanning electron microscopy to determine the transformation mechanism of structure. Microstructure analyses showed that size of cementite decreased as a function of heat treatment cycle. With the increase of heat treatment cycle, the grain size of cementite in all specimens started to decrease. As a consequence, these cementite islands transformed to spherical cementite having an average grain size of 5μm. In addition, the wear test results indicated a correspondence between wear rate and thermal cycling. However, the hardness values decreased with increasing heat treatment cycle. En ligne : http://tribology.asmedigitalcollection.asme.org/article.aspx?articleid=1468021 [article] The effect of cementite size and morphology on the abrasive wear behavior of UHC steel [texte imprimé] / Niyazi Ozdemir, Auteur ; Furkan Sarsilmaz, Auteur ; Nuri Orhan, Auteur . - 2008 . - 5 p. Tribology Langues : Anglais (eng) in Transactions of the ASME . Journal of tribology > Vol. 130 n°2 (Mars/Avril 2008) . - 5 p. Résumé : In this study, the abrasive wear behavior of a grain refined hypereutectoid carbon steel containing 1.2% C, 4% Al, 0.20% Mo, and 0.1% Ti was investigated experimentally. Thermal cycles were applied to all specimens about ten times to obtain a fine-grained structure and to gain more softness structures, such as spheroidized cementite for these steels. After every thermal cycle, the microstructures of specimens were examined by scanning electron microscopy to determine the transformation mechanism of structure. Microstructure analyses showed that size of cementite decreased as a function of heat treatment cycle. With the increase of heat treatment cycle, the grain size of cementite in all specimens started to decrease. As a consequence, these cementite islands transformed to spherical cementite having an average grain size of 5μm. In addition, the wear test results indicated a correspondence between wear rate and thermal cycling. However, the hardness values decreased with increasing heat treatment cycle. En ligne : http://tribology.asmedigitalcollection.asme.org/article.aspx?articleid=1468021

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire