Documents disponibles écrits par cet auteur

Gas-solid turbulent flow in a circulating fluidized bed riser / Y. He in Industrial & engineering chemistry research, Vol. 48 N° 17 (Septembre 2009) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 48 N° 17 (Septembre 2009) . - pp. 8098–8108 Titre : Gas-solid turbulent flow in a circulating fluidized bed riser : numerical study of binary particle systems Type de document : texte imprimé Auteurs : Y. He, Auteur ; N. G. Deen, Auteur ; M. van Sint Annaland, Auteur Année de publication : 2009 Article en page(s) : pp. 8098–8108 Note générale : Chemical engineering Langues : Anglais (eng) Mots-clés : Turbulent  gas-particle  multiphase  flow  Circulating  fluidized  bed  riser  Discrete  particle  model  Navier−Stokes  equations  Subgrid  scale  stresses Résumé : Numerical simulations were performed of a turbulent gas-particle multiphase flow in a circulating fluidized bed riser using a hard-sphere discrete particle model (DPM) for the particle phase and the Navier−Stokes equations for the gas phase, where the subgrid scale stresses (SGS) were modeled with the SGS model proposed by Vreman.(1) The model enables the simulation of systems with an arbitrary particle size distribution. In this work, binary mixtures of particles with different diameters were studied. From the numerical results it is found that the particles display size distribution in both horizontal and vertical directions. Small particles have a higher vertical particle velocity than the large particles. With increasing superficial gas velocity, the vertical particle velocity is increased. The average particle velocity and concentration vary both in the horizontal and vertical directions. Finally, the numerical results are compared with the experimental and numerical results of Mathiesen et al.(2). It is found that the simulation results with Vreman’s SGS model agree better with the literature data than those obtained with a classical Smagorinsky(3) model, especially in the zone close to the wall. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie8015297 [article] Gas-solid turbulent flow in a circulating fluidized bed riser : numerical study of binary particle systems [texte imprimé] / Y. He, Auteur ; N. G. Deen, Auteur ; M. van Sint Annaland, Auteur . - 2009 . - pp. 8098–8108. Chemical engineering Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 48 N° 17 (Septembre 2009) . - pp. 8098–8108 Mots-clés : Turbulent  gas-particle  multiphase  flow  Circulating  fluidized  bed  riser  Discrete  particle  model  Navier−Stokes  equations  Subgrid  scale  stresses Résumé : Numerical simulations were performed of a turbulent gas-particle multiphase flow in a circulating fluidized bed riser using a hard-sphere discrete particle model (DPM) for the particle phase and the Navier−Stokes equations for the gas phase, where the subgrid scale stresses (SGS) were modeled with the SGS model proposed by Vreman.(1) The model enables the simulation of systems with an arbitrary particle size distribution. In this work, binary mixtures of particles with different diameters were studied. From the numerical results it is found that the particles display size distribution in both horizontal and vertical directions. Small particles have a higher vertical particle velocity than the large particles. With increasing superficial gas velocity, the vertical particle velocity is increased. The average particle velocity and concentration vary both in the horizontal and vertical directions. Finally, the numerical results are compared with the experimental and numerical results of Mathiesen et al.(2). It is found that the simulation results with Vreman’s SGS model agree better with the literature data than those obtained with a classical Smagorinsky(3) model, especially in the zone close to the wall. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie8015297