Hydrodynamic simulation of horizontal slurry pipeline flow using ANSYS-CFX / Kalekudithi Ekambara in Industrial & engineering chemistry research, Vol. 48 N° 17 (Septembre 2009)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 48 N° 17 (Septembre 2009) . - pp. 8159–8171 Titre : Hydrodynamic simulation of horizontal slurry pipeline flow using ANSYS-CFX Type de document : texte imprimé Auteurs : Kalekudithi Ekambara, Auteur ; R. Sean Sanders, Auteur ; K. Nandakumar, Auteur Année de publication : 2009 Article en page(s) : pp. 8159–8171 Note générale : Chemical engineering Langues : Anglais (eng) Mots-clés : Solid−  liquid (slurry) pipeline flows Three-dimensional hydrodynamic model ANSYS-CFX Résumé : The behavior of horizontal solid−liquid (slurry) pipeline flows was predicted using a transient three-dimensional (3D) hydrodynamic model based on the kinetic theory of granular flows. Computational fluid dynamics (CFD) simulation results, obtained using a commercial CFD software package, ANSYS-CFX, were compared with a number of experimental data sets available in the literature. The simulations were carried out to investigate the effect of in situ solids volume concentration (8 to 45%), particle size (90 to 500 μm), mixture velocity (1.5 to 5.5 m/s), and pipe diameter (50 to 500 mm) on local, time-averaged solids concentration profiles, particle and liquid velocity profiles, and frictional pressure loss. Excellent agreement between the model predictions and the experimental data was obtained. The experimental and simulated results indicate that the particles are asymmetrically distributed in the vertical plane with the degree of asymmetry increasing with increasing particle size. Once the particles are sufficiently large, concentration profiles are dependent only on the in situ solids volume fraction. The present CFD model requires no experimentally determined slurry pipeline flow data for parameter tuning, and thus can be considered to be superior to commonly used, correlation-based empirical models. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie801505z [article] Hydrodynamic simulation of horizontal slurry pipeline flow using ANSYS-CFX [texte imprimé] / Kalekudithi Ekambara, Auteur ; R. Sean Sanders, Auteur ; K. Nandakumar, Auteur . - 2009 . - pp. 8159–8171. Chemical engineering Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 48 N° 17 (Septembre 2009) . - pp. 8159–8171 Mots-clés : Solid−  liquid (slurry) pipeline flows Three-dimensional hydrodynamic model ANSYS-CFX Résumé : The behavior of horizontal solid−liquid (slurry) pipeline flows was predicted using a transient three-dimensional (3D) hydrodynamic model based on the kinetic theory of granular flows. Computational fluid dynamics (CFD) simulation results, obtained using a commercial CFD software package, ANSYS-CFX, were compared with a number of experimental data sets available in the literature. The simulations were carried out to investigate the effect of in situ solids volume concentration (8 to 45%), particle size (90 to 500 μm), mixture velocity (1.5 to 5.5 m/s), and pipe diameter (50 to 500 mm) on local, time-averaged solids concentration profiles, particle and liquid velocity profiles, and frictional pressure loss. Excellent agreement between the model predictions and the experimental data was obtained. The experimental and simulated results indicate that the particles are asymmetrically distributed in the vertical plane with the degree of asymmetry increasing with increasing particle size. Once the particles are sufficiently large, concentration profiles are dependent only on the in situ solids volume fraction. The present CFD model requires no experimentally determined slurry pipeline flow data for parameter tuning, and thus can be considered to be superior to commonly used, correlation-based empirical models. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie801505z

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire