Separation of gas mixtures with FricDiff / Bianca Breure in Industrial & engineering chemistry research, Vol. 48 N° 16 (Août 2009)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 48 N° 16 (Août 2009) . - pp. 7694–7704 Titre : Separation of gas mixtures with FricDiff : a comparison between experimental data and simulations Type de document : texte imprimé Auteurs : Bianca Breure, Auteur ; Lodewijk Schoon, Auteur ; Elias A. J. F. Peters, Auteur Année de publication : 2009 Article en page(s) : pp. 7694–7704 Note générale : Chemical engineering Langues : Anglais (eng) Mots-clés : Helium−  argon mixtures FricDiff modul Résumé : This work describes the experimental procedure and presents experimental results on the separation of helium−argon mixtures in a FricDiff module. A FricDiff module consists of two compartments separated by a porous screen. The mixture to be separated flows through one compartment, the separating agent through the other. Experiments were performed at room temperature and a pressure of approximately 2 bar with nitrogen as the separating agent. In the experiments the pressure of the inlet feed mixture was changed such that convective flow through the porous barrier took place either from the feed mixture compartment to the separating agent compartment or vice versa. The experimental data were compared with a numerical model showing good agreement between mole fractions and molar flow rates. Deviations were observed when the inlet pressures of the feed mixture were compared. This may be attributed to an inaccurate pressure measurement in the experimental setup. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie801738v [article] Separation of gas mixtures with FricDiff : a comparison between experimental data and simulations [texte imprimé] / Bianca Breure, Auteur ; Lodewijk Schoon, Auteur ; Elias A. J. F. Peters, Auteur . - 2009 . - pp. 7694–7704. Chemical engineering Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 48 N° 16 (Août 2009) . - pp. 7694–7704 Mots-clés : Helium−  argon mixtures FricDiff modul Résumé : This work describes the experimental procedure and presents experimental results on the separation of helium−argon mixtures in a FricDiff module. A FricDiff module consists of two compartments separated by a porous screen. The mixture to be separated flows through one compartment, the separating agent through the other. Experiments were performed at room temperature and a pressure of approximately 2 bar with nitrogen as the separating agent. In the experiments the pressure of the inlet feed mixture was changed such that convective flow through the porous barrier took place either from the feed mixture compartment to the separating agent compartment or vice versa. The experimental data were compared with a numerical model showing good agreement between mole fractions and molar flow rates. Deviations were observed when the inlet pressures of the feed mixture were compared. This may be attributed to an inaccurate pressure measurement in the experimental setup. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie801738v

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire