Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur Mohamed Noureddine
Documents disponibles écrits par cet auteur
Affiner la rechercheCharacteristics of surface electromagnetic wave couplers using metal-lens assisted horn antenna / Mohamed Noureddine
Titre : Characteristics of surface electromagnetic wave couplers using metal-lens assisted horn antenna Type de document : texte imprimé Auteurs : Mohamed Noureddine, Auteur ; C. A. Goben, Directeur de thèse Editeur : University of Missouri-Rolla Année de publication : 1979 Importance : 40 f. Présentation : ill. Format : 27 cm. Note générale : Mémoire de Master : Electronique : Etats-Unis, University of Missouri-Rolla : 1979
Bibliogr. f. 41 - 45 . Annexe f. 46 - 61Langues : Anglais (eng) Mots-clés : Surface electromagnetic waves
Microwave horn antenna
Metal-lens assistance
Electromagnetic beamIndex. décimale : Ms00179 Résumé : It has been shown that it is possible to improve the excitation efficiency (coupling coefficient) of Surface Electromagnetic Waves (SEW) on water by using a metal-lens assisted horn antenna.
These experiments have been done at a microwave frequency of 9.5 GHz.
The distance, d, of the aiming point of the center line of the microwave horn antenna from the corner of the prism was found for a maximum reading to be 0.85λ and 1.36λ, respectively, when the horn was used without and with the metal-lens assistance.
The metal-lens, when mounted on the horn's aperture, gave a higher peak by 8.8% than the horn used alone.
When using the prism, a 6% higher peak was noted when the metal-lens assisted horn antenna was used.
When collimating the electromagnetic beam horizontally with dielectric lenses, a higher peak of 6.5% was obtained with the metal-lens assisted horn antenna over the horn antenna alone.Characteristics of surface electromagnetic wave couplers using metal-lens assisted horn antenna [texte imprimé] / Mohamed Noureddine, Auteur ; C. A. Goben, Directeur de thèse . - [S.l.] : University of Missouri-Rolla, 1979 . - 40 f. : ill. ; 27 cm.
Mémoire de Master : Electronique : Etats-Unis, University of Missouri-Rolla : 1979
Bibliogr. f. 41 - 45 . Annexe f. 46 - 61
Langues : Anglais (eng)
Mots-clés : Surface electromagnetic waves
Microwave horn antenna
Metal-lens assistance
Electromagnetic beamIndex. décimale : Ms00179 Résumé : It has been shown that it is possible to improve the excitation efficiency (coupling coefficient) of Surface Electromagnetic Waves (SEW) on water by using a metal-lens assisted horn antenna.
These experiments have been done at a microwave frequency of 9.5 GHz.
The distance, d, of the aiming point of the center line of the microwave horn antenna from the corner of the prism was found for a maximum reading to be 0.85λ and 1.36λ, respectively, when the horn was used without and with the metal-lens assistance.
The metal-lens, when mounted on the horn's aperture, gave a higher peak by 8.8% than the horn used alone.
When using the prism, a 6% higher peak was noted when the metal-lens assisted horn antenna was used.
When collimating the electromagnetic beam horizontally with dielectric lenses, a higher peak of 6.5% was obtained with the metal-lens assisted horn antenna over the horn antenna alone.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Spécialité Etat_Exemplaire Ms00179 Ms00179 Papier Bibliothèque centrale Mémoire de Master Disponible Documents numériques
NOUREDDINE.Mohamed.pdfURL