Three-dimensional model of a membrane reactor configuration with cooling tubes / A. Ramírez Serrano in Industrial & engineering chemistry research, Vol. 48 N°3 (Février 2009)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 48 N°3 (Février 2009) . - p. 1134–1139 Titre : Three-dimensional model of a membrane reactor configuration with cooling tubes Type de document : texte imprimé Auteurs : A. Ramírez Serrano, Auteur ; F. Tiscareño Lechuga, Auteur ; J. A. Ochoa Tapia, Auteur Année de publication : 2009 Article en page(s) : p. 1134–1139 Note générale : Chemical engineering Langues : Anglais (eng) Mots-clés : Membrane reactors Cooling tubes Résumé : Membrane reactors are a promising alternative to carry out reactions in which the selectivity can be enhanced by the controlled addition of reactants. In addition, it also is very important to keep the temperature profile within a favorable range. In this work a new configuration is proposed for a membrane reactor with internal heat transfer sources. The configuration is similar to that of a shell and tube heat exchanger with the differences that the shell side is packed with catalyst and some of the tubes are membranes. Although the model assumes plug flow, it considers changes in the superficial velocities due to temperature profiles and variations of the molar flow rates. This geometry requires three-dimensional considerations; however, the solution took advantage of a pseudo-three-dimensional model. Controlled addition of reactant through the membrane not only reduces the effect of the side reactions but also alleviates the hot spots since the rates of reactions are decreased. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie800641h [article] Three-dimensional model of a membrane reactor configuration with cooling tubes [texte imprimé] / A. Ramírez Serrano, Auteur ; F. Tiscareño Lechuga, Auteur ; J. A. Ochoa Tapia, Auteur . - 2009 . - p. 1134–1139. Chemical engineering Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 48 N°3 (Février 2009) . - p. 1134–1139 Mots-clés : Membrane reactors Cooling tubes Résumé : Membrane reactors are a promising alternative to carry out reactions in which the selectivity can be enhanced by the controlled addition of reactants. In addition, it also is very important to keep the temperature profile within a favorable range. In this work a new configuration is proposed for a membrane reactor with internal heat transfer sources. The configuration is similar to that of a shell and tube heat exchanger with the differences that the shell side is packed with catalyst and some of the tubes are membranes. Although the model assumes plug flow, it considers changes in the superficial velocities due to temperature profiles and variations of the molar flow rates. This geometry requires three-dimensional considerations; however, the solution took advantage of a pseudo-three-dimensional model. Controlled addition of reactant through the membrane not only reduces the effect of the side reactions but also alleviates the hot spots since the rates of reactions are decreased. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie800641h

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire