[article]
Titre : |
Direct deoxy-liquefaction of poplar leaves to biopetroleum with two kinds of catalysts |
Type de document : |
texte imprimé |
Auteurs : |
Libin Wu, Auteur ; Shipeng Guo, Auteur ; Chao Wang, Auteur |
Année de publication : |
2009 |
Article en page(s) : |
p. 9248–9255 |
Note générale : |
Chemistry engineering |
Langues : |
Anglais (eng) |
Mots-clés : |
Deoxy-Liquefaction Biopetroleum Kinds of Catalysts |
Résumé : |
The objective of this study was to investigate the direct deoxy-liquefaction of poplar leaves with two kinds of catalysts (T203, Z409). The optimum conditions were found to be at a temperature of 623 K with 3% T203 and 5% Z409. The effect of these catalysts on the products was investigated, and the obtained results were compared with similar experiments without catalyst. The oil yield of 10.18% was obtained without catalyst and reached 12.22% with 3% T203. Higher oil yield of 16.18% was observed when 5% Z409 was used. The relative contents of hydrocarbons (alkanes and aromatics) were high to 42.91 and 55.89% when using 3% T203 and 5% Z409 as catalysts, and some light alkanes such as C7H16 and C8H18 were also detected in the oil. The most striking characteristics of the oils were that H/C > 1.75, oxygen content 44.33 MJ kg−1. |
En ligne : |
http://pubs.acs.org/doi/abs/10.1021/ie801129b |
in Industrial & engineering chemistry research > Vol. 47 N° 23 (Décembre 2008) . - p. 9248–9255
[article] Direct deoxy-liquefaction of poplar leaves to biopetroleum with two kinds of catalysts [texte imprimé] / Libin Wu, Auteur ; Shipeng Guo, Auteur ; Chao Wang, Auteur . - 2009 . - p. 9248–9255. Chemistry engineering Langues : Anglais ( eng) in Industrial & engineering chemistry research > Vol. 47 N° 23 (Décembre 2008) . - p. 9248–9255
Mots-clés : |
Deoxy-Liquefaction Biopetroleum Kinds of Catalysts |
Résumé : |
The objective of this study was to investigate the direct deoxy-liquefaction of poplar leaves with two kinds of catalysts (T203, Z409). The optimum conditions were found to be at a temperature of 623 K with 3% T203 and 5% Z409. The effect of these catalysts on the products was investigated, and the obtained results were compared with similar experiments without catalyst. The oil yield of 10.18% was obtained without catalyst and reached 12.22% with 3% T203. Higher oil yield of 16.18% was observed when 5% Z409 was used. The relative contents of hydrocarbons (alkanes and aromatics) were high to 42.91 and 55.89% when using 3% T203 and 5% Z409 as catalysts, and some light alkanes such as C7H16 and C8H18 were also detected in the oil. The most striking characteristics of the oils were that H/C > 1.75, oxygen content 44.33 MJ kg−1. |
En ligne : |
http://pubs.acs.org/doi/abs/10.1021/ie801129b |
|