Documents disponibles écrits par cet auteur

Influence of particle size, applied compression, and substratum material on particle-surface adhesion force using the centrifuge technique / Marcos A Felicetti in Industrial & engineering chemistry research, Vol. 48 N°2 (Janvier 2009) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 48 N°2 (Janvier 2009) . - p.877–887 Titre : Influence of particle size, applied compression, and substratum material on particle-surface adhesion force using the centrifuge technique Type de document : texte imprimé Auteurs : Marcos A Felicetti, Auteur ; Giancarlo R Salazar-Banda, Auteur ; José R Coury, Auteur ; Mônica L Aguiar, Auteur Année de publication : 2009 Article en page(s) : p.877–887 Note générale : chemical enginneering Langues : Anglais (eng) Mots-clés : centrifuge  technique Résumé : The centrifuge technique was used to investigate the influence of particle size, applied compression, and substrate material (stainless steel, glass, Teflon, and poly(vinyl chloride)) on particle−surface adhesion force. For this purpose, phosphatic rock (ρp = 3090 kg/m3) and manioc starch particles (ρp = 1480 kg/m3) were used as test particles. A microcentrifuge that reached a maximum rotation speed of 14 000 rpm and which contained specially designed centrifuge tubes was used in the adhesion force measurements. The curves showed that the adhesion force profile followed a normal log distribution. The adhesion force increased linearly with particle size and with the increase of each increment of compression force. The manioc starch particles presented greater adhesion forces than the phosphatic rock particles for all particle sizes studied. The glass substrate showed a higher adherence than the other materials, probably due to its smoother topographic surface roughness in relation to the other substrata. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie071506u [article] Influence of particle size, applied compression, and substratum material on particle-surface adhesion force using the centrifuge technique [texte imprimé] / Marcos A Felicetti, Auteur ; Giancarlo R Salazar-Banda, Auteur ; José R Coury, Auteur ; Mônica L Aguiar, Auteur . - 2009 . - p.877–887. chemical enginneering Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 48 N°2 (Janvier 2009) . - p.877–887 Mots-clés : centrifuge  technique Résumé : The centrifuge technique was used to investigate the influence of particle size, applied compression, and substrate material (stainless steel, glass, Teflon, and poly(vinyl chloride)) on particle−surface adhesion force. For this purpose, phosphatic rock (ρp = 3090 kg/m3) and manioc starch particles (ρp = 1480 kg/m3) were used as test particles. A microcentrifuge that reached a maximum rotation speed of 14 000 rpm and which contained specially designed centrifuge tubes was used in the adhesion force measurements. The curves showed that the adhesion force profile followed a normal log distribution. The adhesion force increased linearly with particle size and with the increase of each increment of compression force. The manioc starch particles presented greater adhesion forces than the phosphatic rock particles for all particle sizes studied. The glass substrate showed a higher adherence than the other materials, probably due to its smoother topographic surface roughness in relation to the other substrata. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie071506u