Spray coating of adsorbent with polymer latex on sand particles for fluoride removal in drinking water / Hai-Xia Wu in Industrial & engineering chemistry research, Vol. 47 n°14 (Juillet 2008)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 47 n°14 (Juillet 2008) . - p. 4697-4702 Titre : Spray coating of adsorbent with polymer latex on sand particles for fluoride removal in drinking water Type de document : texte imprimé Auteurs : Hai-Xia Wu, Auteur ; Ting-Jie Wang, Auteur ; Xiao Min Dou, Auteur ; Bei Zhao, Auteur Année de publication : 2008 Article en page(s) : p. 4697-4702 Note générale : Bibliogr. p. 4702 Langues : Anglais (eng) Mots-clés : Fe-Al-Ce adsorbent  Polymer latex  Spray coating Résumé : An iron-aluminum-cerium trimetal hydroxide (Fe-Al-Ce) adsorbent with an acrylic-styrene copolymer latex binder, which can cross-link and cure at room temperature, was coated on sand particles by spray coating. The adhesion of the coated layer increased with the latex/Fe-Al-Ce ratio. A suitable latex/Fe-Al-Ce ratio and thickness of coated adsorbent were determined to be 0.8 and 70 μm, respectively, giving good stability and adsorption capacity. The corresponding adsorption capacity of fluoride ions on the coated sand reached 3.46 mg/g at pH 7.0 and an initial fluoride concentration of 50 mg/L. Sand coated with Fe−Al−Ce is a potential adsorbent for use in a packed bed for fluoride removal from drinking water. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie800278b [article] Spray coating of adsorbent with polymer latex on sand particles for fluoride removal in drinking water [texte imprimé] / Hai-Xia Wu, Auteur ; Ting-Jie Wang, Auteur ; Xiao Min Dou, Auteur ; Bei Zhao, Auteur . - 2008 . - p. 4697-4702. Bibliogr. p. 4702 Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 47 n°14 (Juillet 2008) . - p. 4697-4702 Mots-clés : Fe-Al-Ce adsorbent  Polymer latex  Spray coating Résumé : An iron-aluminum-cerium trimetal hydroxide (Fe-Al-Ce) adsorbent with an acrylic-styrene copolymer latex binder, which can cross-link and cure at room temperature, was coated on sand particles by spray coating. The adhesion of the coated layer increased with the latex/Fe-Al-Ce ratio. A suitable latex/Fe-Al-Ce ratio and thickness of coated adsorbent were determined to be 0.8 and 70 μm, respectively, giving good stability and adsorption capacity. The corresponding adsorption capacity of fluoride ions on the coated sand reached 3.46 mg/g at pH 7.0 and an initial fluoride concentration of 50 mg/L. Sand coated with Fe−Al−Ce is a potential adsorbent for use in a packed bed for fluoride removal from drinking water. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie800278b

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire