Influences of refrigerant-based nanofluid composition and heating condition on the migration of nanoparticles during pool boiling. / Peng, Hao in International journal of refrigeration, Vol. 34 N° 8 (Décembre 2011)  

Influences of refrigerant-based nanofluid composition and heating condition on the migration of nanoparticles during pool boiling. = Influences de la composition et le chauffage d'un nanofluide sur la migration des nanoparticules lors de l'ébullition libre. Partie I : mesures expérimentales : Part I: Experimental measurement [texte imprimé] / Peng, Hao, Auteur ; Guoliang Ding, Auteur ; Haitao Hu, Auteur . - 2012 . - pp. 1823–1832.
Génie mécanique
Langues : Anglais (eng)
in International journal of refrigeration > Vol. 34 N° 8 (Décembre 2011) . - pp. 1823–1832

Mots-clés :	Heat flux Oil Particle Pool boiling Refrigerant
Résumé :	Influences of refrigerant-based nanofluid composition and heating condition on the migration of nanoparticles during pool boiling were investigated experimentally. The nanoparticles include Cu (average diameters of 20, 50 and 80 nm), Al and Al2O3 (average diameters of 20 nm), and CuO (average diameter of 40 nm). The refrigerants include R113, R141b and n-pentane. The mass fraction of lubricating oil RB68EP is from 0 to 10 wt%, the heat flux is from 10 to 100 kW m−2, and the initial liquid-level height is from 1.3 to 3.4 cm. The experimental results show that the migration ratio of nanoparticles during the pool boiling of refrigerant-based nanofluid increases with the decrease of nanoparticle density, nanoparticle size, dynamic viscosity of refrigerant, mass fraction of lubricating oil or heat flux; while increases with the increase of liquid-phase density of refrigerant or initial liquid-level height.
ISSN :	0140-7007
En ligne :	http://www.sciencedirect.com/science/article/pii/S0140700711001848