Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner à l'écran de résultat de la dernière recherche | Consulter l'historique des recherches | Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur Dinçer Bozkaya
Documents disponibles écrits par cet auteur
Affiner la rechercheThe effects of interfacial particles on the contact of an elastic sphere with a rigid flat surface / Dinçer Bozkaya in Transactions of the ASME . Journal of tribology, Vol. 130 N° 4 (Octobre 2008)
[article]
in Transactions of the ASME . Journal of tribology > Vol. 130 N° 4 (Octobre 2008) . - 13 p.
Titre : The effects of interfacial particles on the contact of an elastic sphere with a rigid flat surface Type de document : texte imprimé Auteurs : Dinçer Bozkaya, Auteur ; Sinan Müftü, Auteur Article en page(s) : 13 p. Note générale : Tribology Langues : Anglais (eng) Mots-clés : Force Pressure Particulate matter Separation (Technology) Résumé : In chemical mechanical polishing (CMP), a rigid wafer is forced on a rough elastomeric polishing pad, while a slurry containing abrasive particles flows through the interface. One of the important factors that influence the material removal rate in CMP is the magnitude of contact force transmitted to the abrasive particles trapped at the contact interface. The total push-down force is distributed to the direct contact between the wafer and the pad, and to the three-body contact between the wafer, the pad, and the abrasive particles. The presence of the abrasive particles alters the asperity contact, which otherwise can be described by Hertz contact relationships. In this study, the effect of the interfacial particles on the single asperity contact is investigated. An approach used by Greenwood and Tripp (1967, “The Elastic Contact of Rough Spheres ,” ASME J. Appl. Mech., 34, pp. 153–160) to study the contact of rough spheres is utilized since the presence of the particles provides a rough character to the contact. The results show that the contact behavior becomes non-Hertzian with decreasing contact force and increasing elastic modulus, particle size, and particle concentration. The role of the interfacial particles is to spread the contact over a larger area while lowering the maximum contact pressure at the center of contact predicted by Hertz contact. The conditions required to transfer the contact force on the particles effectively are also described. En ligne : http://tribology.asmedigitalcollection.asme.org/article.aspx?articleid=1468097 [article] The effects of interfacial particles on the contact of an elastic sphere with a rigid flat surface [texte imprimé] / Dinçer Bozkaya, Auteur ; Sinan Müftü, Auteur . - 13 p.
Tribology
Langues : Anglais (eng)
in Transactions of the ASME . Journal of tribology > Vol. 130 N° 4 (Octobre 2008) . - 13 p.
Mots-clés : Force Pressure Particulate matter Separation (Technology) Résumé : In chemical mechanical polishing (CMP), a rigid wafer is forced on a rough elastomeric polishing pad, while a slurry containing abrasive particles flows through the interface. One of the important factors that influence the material removal rate in CMP is the magnitude of contact force transmitted to the abrasive particles trapped at the contact interface. The total push-down force is distributed to the direct contact between the wafer and the pad, and to the three-body contact between the wafer, the pad, and the abrasive particles. The presence of the abrasive particles alters the asperity contact, which otherwise can be described by Hertz contact relationships. In this study, the effect of the interfacial particles on the single asperity contact is investigated. An approach used by Greenwood and Tripp (1967, “The Elastic Contact of Rough Spheres ,” ASME J. Appl. Mech., 34, pp. 153–160) to study the contact of rough spheres is utilized since the presence of the particles provides a rough character to the contact. The results show that the contact behavior becomes non-Hertzian with decreasing contact force and increasing elastic modulus, particle size, and particle concentration. The role of the interfacial particles is to spread the contact over a larger area while lowering the maximum contact pressure at the center of contact predicted by Hertz contact. The conditions required to transfer the contact force on the particles effectively are also described. En ligne : http://tribology.asmedigitalcollection.asme.org/article.aspx?articleid=1468097