Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner à l'écran de résultat de la dernière recherche | Consulter l'historique des recherches | Retourner au premier écran avec les recherches... |
Détail de l'indexation
621.47
621 Ingénierie mécanique en général. Technologie nucléaire. Ingénierie électrique. Machinerie
621.01 Théorie de l'ingénierie mécanique. La mécanique comme base de l'ingénierie mécanique
621.039 Science nucléaire appliquée. Energie atomique et industrie atomique. Ingénierie nucléaire en général
621.042
621.2/621.5
621.22 Energie hydraulique. Force hydraulique. Machines hydrauliques
621.224 Turbines hydraulique. Force hydraulique. Machines hydrauliques
621.3 Ingénierie électrique
621.3.038 équipements électrique
621.3.049 Construction de circuit électrique
621.3/016
621.3/530
621.3/537
621.31 Production,approvisionnement et contrôle de l'électricité.Machines et appareils électriques.Mesure électrique.Magnétisme et électrostatique appliquées
621.311 Production et approvisionnement en énergie électrique. Usines génératrices. Systèmes, équipement et disposition d'approvisionnement en énergie électrique. Schémas d'électrification
621.311 TEC Production et approvisionnemnt en énergie électrique. Usines génératrices. Système, équipement et disposition d'approvisionnement en énergie électrique.Usines génératrices.systémes ,équipement en énergie électrique. Schémas d'électrification
621.311.1 Résaux d'approvisionnement du point de vue de la distribution d'énergie .Résaux et grilles régionaux.Districts d'approvisionnet.Sous-stations.Schémas d'électrification
621.311.24 Industrie de énergétique au départ de sources d'énergie naturelles
621.311.243 Industrie de l'énergie solaire. Collecteurs solaires (systèmes de miroirs, fours solaires). Piles photovoltaïques
621.311.25 Industrie de l'énergie nucléaire (atomique)
621.313 Machines électriques
621.313.13 Machines électriques. Moteurs
621.314.5 Transformation du courant alternatif en courant continu et inversement. Convertisseurs. Inverseurs
621.315 Transmission de l'énergie électrique. Distribution de l'énergie et lignes de télécommunication
621.315.5 Conducteurs et semi-conducteurs selon le matériau
621.315.6 Mtériaux isolants
621.315.61 Matériaux isolants. Matériaux diélectriques
621.317 Mesure électrique (appareils et instruments)
621.317.3 Mesure des grandeurs électriques
621.317.34 Mesure des caractéristiques de transmission des réseaux et des lignes
621.318 Magnétisme appliqué.Matériaux et appareils magnétiques. Bobines.Relais
621.318.1 Matériaux magnétiques en général
621.319.1 Ferro-électricité appliquée réseaux
621.319/001.64
621.32 Sources de lumiére électrique
621.34
621.34/551.4
621.34/621.38
621.34/624
621.34/624/621.38
621.34/624/660
621.355.2 Accumulateurs en plomb (acide-plomb) en générale
621.357 Electrochimie industrielle . Electrolyse . Electrodéposition
621.36 Thermoélectricité.Chauffage électrique production d'électricité par la chaleur.Générateur thermoélectriques
621.36/7/05
621.362 Production d'électricité par la chaleur. Générateurs thermoélectriques
621.37 Technique des ondes électriques, des ondes électromagnétiques, des oscillations et impulsions électriques
621.377 Dispositifs électriques de stockage de l'information (mémoires)
621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X
621.38/621.381
621.38/629.13
621.381
621.381/001
621.381/001.6
621.382 Dispositifs électroniques utilisant les effets des corps solides. Dispositifs semi-conducteurs
621.385.833 Microscope électronique. Caméras de diffraction.
621.39 Télécommunication. Télégraphie. Téléphonie. Radiocommunication. Technologie et équipement vidéo. Télécontrôle
621.391 Notions générales sur l'ingénierie des communications électriques. Cybernétique. Théorie de l'information, théorie des signaux (en connexion avec la technique des télécommunications électriques)
621.391.82 Perturbations.Interférence.Statique
621.391.837 Qualité de l'image due aux transducteurs de transmission et de réception. Résolution de l'image. Fantômes. Distorsion géométrique. Brillance. Contraste. Effets dynamiques. Modèle d'interférence...
621.396 Appareils et méthodes de radio-communication(radio).
621.396.67 Antennes. Antennes radio. Système de mise en terre
621.396.96 Radar ( (radiolocalisation)
621.397 Technologie vidéo. Ingénierie de la télévision. Enregistrement vidéo, transmission et reproduction. Equipements et réseau vidéo
621.397.13 Télévision
621.4 Moteurs thermiques
621.43 moteurs à combustion interne. Moteurs à explosions
621.436.1 Moteurs Diesel dans le sens étroit du mot
621.438 Turbines de combustion. Turbines à gaz. Turbines à huile
621.45 Moteurs à réaction . Réacteurs
621.48
621.5 Energie pneumatique. Machinerie et outils. Réfrigération
621.51 Compression et impulsion de l'air et autres gaz. Compresseurs. Ventilateur à haute pression
621.52 Réfaction de l'air et des autres gaz. Pompes à air. Exhausteur. Raréfacteur. Pompes à vide
621.56 Réfrigération en général. Production de basse température
621.64 Installation de stockage et de distribution des fluides. Conteneurs, conduits, tuyaux.
621.67 Pompes centrifuges et turbo-pompes
621.7 Technologie mécanique en général. Procédés. Outillages. Machines. Equipement
621.74 Travail de fonderie. Disposition et équipement de la fonderie. Moulage et fusion
621.762 Métallurgie des poudres
621.791 Soudure et techniques analogues
621.791/.792 Assemblage des matériaux
621.793/795 Traitement de finition des surfaces
621.8
621.861 Poulies et palans. Appareil de levage. Palans
621.865.8 Manipulateurs, robots industriels
621.89 Lubrification. Lubrifiants. Dispositifs de lubrification
621.891 Généralités. Frottement dans les machines. Propriétés des lubrifiants
621.9
621/336
621/530
621/621.3/621.48
621/651.8
621.01 Théorie de l'ingénierie mécanique. La mécanique comme base de l'ingénierie mécanique
621.039 Science nucléaire appliquée. Energie atomique et industrie atomique. Ingénierie nucléaire en général
621.042
621.2/621.5
621.22 Energie hydraulique. Force hydraulique. Machines hydrauliques
621.224 Turbines hydraulique. Force hydraulique. Machines hydrauliques
621.3 Ingénierie électrique
621.3.038 équipements électrique
621.3.049 Construction de circuit électrique
621.3/016
621.3/530
621.3/537
621.31 Production,approvisionnement et contrôle de l'électricité.Machines et appareils électriques.Mesure électrique.Magnétisme et électrostatique appliquées
621.311 Production et approvisionnement en énergie électrique. Usines génératrices. Systèmes, équipement et disposition d'approvisionnement en énergie électrique. Schémas d'électrification
621.311 TEC Production et approvisionnemnt en énergie électrique. Usines génératrices. Système, équipement et disposition d'approvisionnement en énergie électrique.Usines génératrices.systémes ,équipement en énergie électrique. Schémas d'électrification
621.311.1 Résaux d'approvisionnement du point de vue de la distribution d'énergie .Résaux et grilles régionaux.Districts d'approvisionnet.Sous-stations.Schémas d'électrification
621.311.24 Industrie de énergétique au départ de sources d'énergie naturelles
621.311.243 Industrie de l'énergie solaire. Collecteurs solaires (systèmes de miroirs, fours solaires). Piles photovoltaïques
621.311.25 Industrie de l'énergie nucléaire (atomique)
621.313 Machines électriques
621.313.13 Machines électriques. Moteurs
621.314.5 Transformation du courant alternatif en courant continu et inversement. Convertisseurs. Inverseurs
621.315 Transmission de l'énergie électrique. Distribution de l'énergie et lignes de télécommunication
621.315.5 Conducteurs et semi-conducteurs selon le matériau
621.315.6 Mtériaux isolants
621.315.61 Matériaux isolants. Matériaux diélectriques
621.317 Mesure électrique (appareils et instruments)
621.317.3 Mesure des grandeurs électriques
621.317.34 Mesure des caractéristiques de transmission des réseaux et des lignes
621.318 Magnétisme appliqué.Matériaux et appareils magnétiques. Bobines.Relais
621.318.1 Matériaux magnétiques en général
621.319.1 Ferro-électricité appliquée réseaux
621.319/001.64
621.32 Sources de lumiére électrique
621.34
621.34/551.4
621.34/621.38
621.34/624
621.34/624/621.38
621.34/624/660
621.355.2 Accumulateurs en plomb (acide-plomb) en générale
621.357 Electrochimie industrielle . Electrolyse . Electrodéposition
621.36 Thermoélectricité.Chauffage électrique production d'électricité par la chaleur.Générateur thermoélectriques
621.36/7/05
621.362 Production d'électricité par la chaleur. Générateurs thermoélectriques
621.37 Technique des ondes électriques, des ondes électromagnétiques, des oscillations et impulsions électriques
621.377 Dispositifs électriques de stockage de l'information (mémoires)
621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X
621.38/621.381
621.38/629.13
621.381
621.381/001
621.381/001.6
621.382 Dispositifs électroniques utilisant les effets des corps solides. Dispositifs semi-conducteurs
621.385.833 Microscope électronique. Caméras de diffraction.
621.39 Télécommunication. Télégraphie. Téléphonie. Radiocommunication. Technologie et équipement vidéo. Télécontrôle
621.391 Notions générales sur l'ingénierie des communications électriques. Cybernétique. Théorie de l'information, théorie des signaux (en connexion avec la technique des télécommunications électriques)
621.391.82 Perturbations.Interférence.Statique
621.391.837 Qualité de l'image due aux transducteurs de transmission et de réception. Résolution de l'image. Fantômes. Distorsion géométrique. Brillance. Contraste. Effets dynamiques. Modèle d'interférence...
621.396 Appareils et méthodes de radio-communication(radio).
621.396.67 Antennes. Antennes radio. Système de mise en terre
621.396.96 Radar ( (radiolocalisation)
621.397 Technologie vidéo. Ingénierie de la télévision. Enregistrement vidéo, transmission et reproduction. Equipements et réseau vidéo
621.397.13 Télévision
621.4 Moteurs thermiques
621.43 moteurs à combustion interne. Moteurs à explosions
621.436.1 Moteurs Diesel dans le sens étroit du mot
621.438 Turbines de combustion. Turbines à gaz. Turbines à huile
621.45 Moteurs à réaction . Réacteurs
621.48
621.5 Energie pneumatique. Machinerie et outils. Réfrigération
621.51 Compression et impulsion de l'air et autres gaz. Compresseurs. Ventilateur à haute pression
621.52 Réfaction de l'air et des autres gaz. Pompes à air. Exhausteur. Raréfacteur. Pompes à vide
621.56 Réfrigération en général. Production de basse température
621.64 Installation de stockage et de distribution des fluides. Conteneurs, conduits, tuyaux.
621.67 Pompes centrifuges et turbo-pompes
621.7 Technologie mécanique en général. Procédés. Outillages. Machines. Equipement
621.74 Travail de fonderie. Disposition et équipement de la fonderie. Moulage et fusion
621.762 Métallurgie des poudres
621.791 Soudure et techniques analogues
621.791/.792 Assemblage des matériaux
621.793/795 Traitement de finition des surfaces
621.8
621.861 Poulies et palans. Appareil de levage. Palans
621.865.8 Manipulateurs, robots industriels
621.89 Lubrification. Lubrifiants. Dispositifs de lubrification
621.891 Généralités. Frottement dans les machines. Propriétés des lubrifiants
621.9
621/336
621/530
621/621.3/621.48
621/651.8
Ouvrages de la bibliothèque en indexation 621.47
Affiner la rechercheStructural design and analysis of the toroidal heliostat / Chuncheng Zang in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 4 (Novembre 2010)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 4 (Novembre 2010) . - pp. [041007/1-6]
Titre : Structural design and analysis of the toroidal heliostat Type de document : texte imprimé Auteurs : Chuncheng Zang, Auteur ; Zhifeng Wang, Auteur ; Wenfeng Liang, Auteur Année de publication : 2011 Article en page(s) : pp. [041007/1-6] Note générale : Energie Solaire Langues : Anglais (eng) Mots-clés : Heliostat Solar power tower Structural design Finite element methods Spinning elevation Index. décimale : 621.47 Résumé : Heliostat is an important component in the solar power tower station because its cost, optical performance, and mechanical performance have great influence on the overall property evaluation of the station. The T-shape heliostat tracking the sun in the azimuth-elevation mode has been commonly developed and successfully applied in many stations. In recent years, some researchers have developed spinning-elevation heliostats and have analyzed their optical performance. In this paper, the structure of a 16 m2 toroidal heliostat tracking the sun in the spinning-elevation mode is designed, and the mechanical performance of the structure under wind load is analyzed by means of the finite element method. The trends of force, moments, and vibration modes with the change in elevation have been presented, and the classic status is analyzed in detail when their maximum values occur. Furthermore, the advantages and disadvantages of a toroidal heliostat in reducing the cost are discussed compared with those of a traditional T-shape heliostat.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] [article] Structural design and analysis of the toroidal heliostat [texte imprimé] / Chuncheng Zang, Auteur ; Zhifeng Wang, Auteur ; Wenfeng Liang, Auteur . - 2011 . - pp. [041007/1-6].
Energie Solaire
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 4 (Novembre 2010) . - pp. [041007/1-6]
Mots-clés : Heliostat Solar power tower Structural design Finite element methods Spinning elevation Index. décimale : 621.47 Résumé : Heliostat is an important component in the solar power tower station because its cost, optical performance, and mechanical performance have great influence on the overall property evaluation of the station. The T-shape heliostat tracking the sun in the azimuth-elevation mode has been commonly developed and successfully applied in many stations. In recent years, some researchers have developed spinning-elevation heliostats and have analyzed their optical performance. In this paper, the structure of a 16 m2 toroidal heliostat tracking the sun in the spinning-elevation mode is designed, and the mechanical performance of the structure under wind load is analyzed by means of the finite element method. The trends of force, moments, and vibration modes with the change in elevation have been presented, and the classic status is analyzed in detail when their maximum values occur. Furthermore, the advantages and disadvantages of a toroidal heliostat in reducing the cost are discussed compared with those of a traditional T-shape heliostat.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] Study on the change in photovoltage by control of cell gap in dye-sensitized solar cells / Chaehyeon Lee in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 2 (Mai 2010)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 2 (Mai 2010) . - pp. [021104/1-5]
Titre : Study on the change in photovoltage by control of cell gap in dye-sensitized solar cells Type de document : texte imprimé Auteurs : Chaehyeon Lee, Auteur ; Weekyung Kang, Auteur ; Min Jae Ko, Auteur Année de publication : 2011 Article en page(s) : pp. [021104/1-5] Note générale : Energie Solaire Langues : Anglais (eng) Mots-clés : Dyes Electrochemical impedance spectroscopy Electrolytes Electron-hole recombination Solar cells Index. décimale : 621.47 Résumé : Photo-electrochemical properties of dye-sensitized solar cells (DSSCs) were investigated by changing the gap between working and counter electrodes. The open-circuit voltage (VOC) of DSSCs was significantly increased from 616 mV to 776 mV by about 26% with 1-methyl-3-butyl imidazolium iodide (BMII) based electrolyte and from 428 mV to 513 mV by 20% with lithium iodide (LiI) based electrolyte as the cell gap increased from 16 µm to 224 µm. From the electrochemical impedance spectroscopy, it was found that the resistance of the electrolyte was increased as the cell gap widened. This resulted in the reduction in the dark current associated with the VOC enhancement. The transient photovoltage spectroscopic measurement confirmed that the time constant for charge recombination between TiO2 and electrolyte became slower as the cell gap of the DSSC with LiI electrolyte increased, which could be an additional reason for the VOC enhancement. The optimal cell gap was determined to be around 31.3 µm for the BMII electrolyte system, and around 75.5 µm for the LiI electrolyte system in terms of the energy-conversion efficiency.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] [article] Study on the change in photovoltage by control of cell gap in dye-sensitized solar cells [texte imprimé] / Chaehyeon Lee, Auteur ; Weekyung Kang, Auteur ; Min Jae Ko, Auteur . - 2011 . - pp. [021104/1-5].
Energie Solaire
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 2 (Mai 2010) . - pp. [021104/1-5]
Mots-clés : Dyes Electrochemical impedance spectroscopy Electrolytes Electron-hole recombination Solar cells Index. décimale : 621.47 Résumé : Photo-electrochemical properties of dye-sensitized solar cells (DSSCs) were investigated by changing the gap between working and counter electrodes. The open-circuit voltage (VOC) of DSSCs was significantly increased from 616 mV to 776 mV by about 26% with 1-methyl-3-butyl imidazolium iodide (BMII) based electrolyte and from 428 mV to 513 mV by 20% with lithium iodide (LiI) based electrolyte as the cell gap increased from 16 µm to 224 µm. From the electrochemical impedance spectroscopy, it was found that the resistance of the electrolyte was increased as the cell gap widened. This resulted in the reduction in the dark current associated with the VOC enhancement. The transient photovoltage spectroscopic measurement confirmed that the time constant for charge recombination between TiO2 and electrolyte became slower as the cell gap of the DSSC with LiI electrolyte increased, which could be an additional reason for the VOC enhancement. The optimal cell gap was determined to be around 31.3 µm for the BMII electrolyte system, and around 75.5 µm for the LiI electrolyte system in terms of the energy-conversion efficiency.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] Synchronization of a single-phase photovoltaic generator with the low-voltage utility grid / Nader Anani in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 1 (Fevrier 2011)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 1 (Fevrier 2011) . - 08 p.
Titre : Synchronization of a single-phase photovoltaic generator with the low-voltage utility grid Type de document : texte imprimé Auteurs : Nader Anani, Auteur ; Omar Al-Kharji, Auteur ; Prasad Ponnapalli, Auteur Année de publication : 2012 Article en page(s) : 08 p. Note générale : Solar energy Langues : Anglais (eng) Mots-clés : Digital phase locked loops Field programmable gate arrays Invertors Photovoltaic power systems Synchronisation Index. décimale : 621.47 Résumé : The increased generation of electrical energy from renewable sources and its integration into the low voltage grid have necessitated regulations governing the connection of renewable energy generators to the grid. This was deemed necessary to preserve the integrity and the correct operation of the grid. This paper presents a new architecture of a hybrid phase lock loop circuit topology for synchronizing a single-phase inverter fed from a renewable energy source such as a photovoltaic (PV) generator to the low voltage grid. The system uses a digital phase lock loop (DPLL) architecture, which is based on the arctan phase detector, driving a phase lock loop (PLL) to synchronize a PV inverter with the grid. The proposed system has been tested by simulation using simulink/matlab. The test results demonstrate the ability of the system to synchronize a PV inverter with the grid and to re-establish synchronization following a sudden perturbation in the grid voltage such as a single or a multistep change in phase. The system is digital and can be readily implemented using an FPGA (field programmable gate array) and hence can be easily embedded in a home or small scale single-phase PV inverter. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...] [article] Synchronization of a single-phase photovoltaic generator with the low-voltage utility grid [texte imprimé] / Nader Anani, Auteur ; Omar Al-Kharji, Auteur ; Prasad Ponnapalli, Auteur . - 2012 . - 08 p.
Solar energy
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 1 (Fevrier 2011) . - 08 p.
Mots-clés : Digital phase locked loops Field programmable gate arrays Invertors Photovoltaic power systems Synchronisation Index. décimale : 621.47 Résumé : The increased generation of electrical energy from renewable sources and its integration into the low voltage grid have necessitated regulations governing the connection of renewable energy generators to the grid. This was deemed necessary to preserve the integrity and the correct operation of the grid. This paper presents a new architecture of a hybrid phase lock loop circuit topology for synchronizing a single-phase inverter fed from a renewable energy source such as a photovoltaic (PV) generator to the low voltage grid. The system uses a digital phase lock loop (DPLL) architecture, which is based on the arctan phase detector, driving a phase lock loop (PLL) to synchronize a PV inverter with the grid. The proposed system has been tested by simulation using simulink/matlab. The test results demonstrate the ability of the system to synchronize a PV inverter with the grid and to re-establish synchronization following a sudden perturbation in the grid voltage such as a single or a multistep change in phase. The system is digital and can be readily implemented using an FPGA (field programmable gate array) and hence can be easily embedded in a home or small scale single-phase PV inverter. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...] Technical and economic performance analysis of utilization of solar energy in indoor swimming pools / Olcay Kincay in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 1 (Fevrier 2011)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 1 (Fevrier 2011) . - 08 p.
Titre : Technical and economic performance analysis of utilization of solar energy in indoor swimming pools : an application Type de document : texte imprimé Auteurs : Olcay Kincay, Auteur ; Zafer Utlu, Auteur ; Ugur Akbulut, Auteur Année de publication : 2012 Article en page(s) : 08 p. Note générale : Solar energy Langues : Anglais (eng) Mots-clés : Costing Heat losses Heat transfer Investment Power generation economics Solar absorber-convertors Solar power stations Index. décimale : 621.47 Résumé : In this study, technical and economic performance analyses are conducted in order to determine the optimum collector surface area for indoor swimming pools. Required heat and economical conditions are taken into consideration while performing these evaluations. A brief summary of solar energy source and heat transfer equations for the Olympic pools are given. An Olympic swimming pool is assumed to be in different cities, and energy losses are calculated. For our sample Olympic pool, convective heat loss obtained is −3.86 kW and evaporative heat loss obtained is 265 kW. Total heat loss always maximum in January from 384 kW to 455.1 kW. Solar energy gain (assumption 1000 m2 collector area) and energy gain from boiler for different cities are calculated as maximum solar energy gain in July between 160 and 175 kW and minimum in January between 54.9 and 82 kW. High investment costs for solar power systems are responsible for low value of the reduction rate. Also, according to the energy demand and economical conditions, technical evaluations are performed in order to obtain optimum surface collector area, and economical analyses are conducted using unified cost method. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...] [article] Technical and economic performance analysis of utilization of solar energy in indoor swimming pools : an application [texte imprimé] / Olcay Kincay, Auteur ; Zafer Utlu, Auteur ; Ugur Akbulut, Auteur . - 2012 . - 08 p.
Solar energy
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 1 (Fevrier 2011) . - 08 p.
Mots-clés : Costing Heat losses Heat transfer Investment Power generation economics Solar absorber-convertors Solar power stations Index. décimale : 621.47 Résumé : In this study, technical and economic performance analyses are conducted in order to determine the optimum collector surface area for indoor swimming pools. Required heat and economical conditions are taken into consideration while performing these evaluations. A brief summary of solar energy source and heat transfer equations for the Olympic pools are given. An Olympic swimming pool is assumed to be in different cities, and energy losses are calculated. For our sample Olympic pool, convective heat loss obtained is −3.86 kW and evaporative heat loss obtained is 265 kW. Total heat loss always maximum in January from 384 kW to 455.1 kW. Solar energy gain (assumption 1000 m2 collector area) and energy gain from boiler for different cities are calculated as maximum solar energy gain in July between 160 and 175 kW and minimum in January between 54.9 and 82 kW. High investment costs for solar power systems are responsible for low value of the reduction rate. Also, according to the energy demand and economical conditions, technical evaluations are performed in order to obtain optimum surface collector area, and economical analyses are conducted using unified cost method. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...] Temperature and irradiance dependence of a dye sensitized solar cell with acetonitrile based electrolyte / Edwin Peng in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 1 (Fevrier 2011)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 1 (Fevrier 2011) . - 07 p.
Titre : Temperature and irradiance dependence of a dye sensitized solar cell with acetonitrile based electrolyte Type de document : texte imprimé Auteurs : Edwin Peng, Auteur ; Halil Berberoglu, Auteur Année de publication : 2012 Article en page(s) : 07 p. Note générale : Solar energy Langues : Anglais (eng) Mots-clés : Dyes Electrolytes Solar cells Index. décimale : 621.47 Résumé : Performance characteristics of an acetonitrile electrolyte based dye-sensitized solar cell were measured experimentally as functions of temperature (from 5 to 50 °C) and irradiance (from 500 to 1500 W m−2). The results indicated two thermal regimes of operation characterized by diffusion and recombination limitation. It was shown that in the diffusion dominated regime the photoconversion efficiency was not a strong function of temperature whereas it decreased significantly with increasing temperature in the recombination dominated regime. Also, it was shown that the recombination rate was not affected significantly by increase in irradiance resulting in an overall larger temperature dependence of cell performance at larger irradiances. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...] [article] Temperature and irradiance dependence of a dye sensitized solar cell with acetonitrile based electrolyte [texte imprimé] / Edwin Peng, Auteur ; Halil Berberoglu, Auteur . - 2012 . - 07 p.
Solar energy
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 1 (Fevrier 2011) . - 07 p.
Mots-clés : Dyes Electrolytes Solar cells Index. décimale : 621.47 Résumé : Performance characteristics of an acetonitrile electrolyte based dye-sensitized solar cell were measured experimentally as functions of temperature (from 5 to 50 °C) and irradiance (from 500 to 1500 W m−2). The results indicated two thermal regimes of operation characterized by diffusion and recombination limitation. It was shown that in the diffusion dominated regime the photoconversion efficiency was not a strong function of temperature whereas it decreased significantly with increasing temperature in the recombination dominated regime. Also, it was shown that the recombination rate was not affected significantly by increase in irradiance resulting in an overall larger temperature dependence of cell performance at larger irradiances. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...] Temperature fluctuation and evaporative loss rate in an algae biofilm photobioreactor / Thomas E. Murphy in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 1 (Fevrier 2011)
PermalinkThe effect of booster reflectors on the photovoltaic water pumping system performance / H. Tabaei in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 1 (Fevrier 2011)
PermalinkThe effects of morphology on the oxidation of ceria by water and carbon dioxide / Luke J. Venstrom in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 1 (Fevrier 2011)
PermalinkThe impacts of climate changes on the renewable energy resources in the Caribbean region / M. E. Angeles in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 3 (Août 2010)
PermalinkThe MED-CSD project / Massimo Moser in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 3 (N° Spécial) (Août 2011)
PermalinkThe Performance of wind turbine smart rotor control approaches during extreme loads / Matthew A. Lackner in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 1 (Janvier 2010)
PermalinkThe SnO2/Sn carbothermic cycle for splitting water and production of hydrogen / Michael Epstein in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 3 (Août 2010)
PermalinkTheory and manufacturing processes of solar nanoantenna electromagnetic collectors / D. K. Kotter in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 1 (Janvier 2010)
PermalinkThermal performances of a high temperature air solar absorber based on compact heat exchange technology / B. Grange in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 3 (N° Spécial) (Août 2011)
PermalinkThermo-economic comparisons of different types of solar desalination processes / Mohamed A. Sharaf in Transactions of the ASME. Journal of solar energy engineering, Vol. 134 N° 3 (Août 2012)
Permalink