Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'indexation
621.5 : Energie pneumatique. Machinerie et outils. Réfrigération
621 Ingénierie mécanique en général. Technologie nucléaire. Ingénierie électrique. Machinerie
621.01 Théorie de l'ingénierie mécanique. La mécanique comme base de l'ingénierie mécanique
621.039 Science nucléaire appliquée. Energie atomique et industrie atomique. Ingénierie nucléaire en général
621.042
621.2/621.5
621.22 Energie hydraulique. Force hydraulique. Machines hydrauliques
621.224 Turbines hydraulique. Force hydraulique. Machines hydrauliques
621.3 Ingénierie électrique
621.3.038 équipements électrique
621.3.049 Construction de circuit électrique
621.3/016
621.3/530
621.3/537
621.31 Production,approvisionnement et contrôle de l'électricité.Machines et appareils électriques.Mesure électrique.Magnétisme et électrostatique appliquées
621.311 Production et approvisionnement en énergie électrique. Usines génératrices. Systèmes, équipement et disposition d'approvisionnement en énergie électrique. Schémas d'électrification
621.311 TEC Production et approvisionnemnt en énergie électrique. Usines génératrices. Système, équipement et disposition d'approvisionnement en énergie électrique.Usines génératrices.systémes ,équipement en énergie électrique. Schémas d'électrification
621.311.1 Résaux d'approvisionnement du point de vue de la distribution d'énergie .Résaux et grilles régionaux.Districts d'approvisionnet.Sous-stations.Schémas d'électrification
621.311.24 Industrie de énergétique au départ de sources d'énergie naturelles
621.311.243 Industrie de l'énergie solaire. Collecteurs solaires (systèmes de miroirs, fours solaires). Piles photovoltaïques
621.311.25 Industrie de l'énergie nucléaire (atomique)
621.313 Machines électriques
621.313.13 Machines électriques. Moteurs
621.314.5 Transformation du courant alternatif en courant continu et inversement. Convertisseurs. Inverseurs
621.315 Transmission de l'énergie électrique. Distribution de l'énergie et lignes de télécommunication
621.315.5 Conducteurs et semi-conducteurs selon le matériau
621.315.6 Mtériaux isolants
621.315.61 Matériaux isolants. Matériaux diélectriques
621.317 Mesure électrique (appareils et instruments)
621.317.3 Mesure des grandeurs électriques
621.317.34 Mesure des caractéristiques de transmission des réseaux et des lignes
621.318 Magnétisme appliqué.Matériaux et appareils magnétiques. Bobines.Relais
621.318.1 Matériaux magnétiques en général
621.319.1 Ferro-électricité appliquée réseaux
621.319/001.64
621.32 Sources de lumiére électrique
621.34
621.34/551.4
621.34/621.38
621.34/624
621.34/624/621.38
621.34/624/660
621.355.2 Accumulateurs en plomb (acide-plomb) en générale
621.357 Electrochimie industrielle . Electrolyse . Electrodéposition
621.36 Thermoélectricité.Chauffage électrique production d'électricité par la chaleur.Générateur thermoélectriques
621.36/7/05
621.362 Production d'électricité par la chaleur. Générateurs thermoélectriques
621.37 Technique des ondes électriques, des ondes électromagnétiques, des oscillations et impulsions électriques
621.377 Dispositifs électriques de stockage de l'information (mémoires)
621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X
621.38/621.381
621.38/629.13
621.381
621.381/001
621.381/001.6
621.382 Dispositifs électroniques utilisant les effets des corps solides. Dispositifs semi-conducteurs
621.385.833 Microscope électronique. Caméras de diffraction.
621.39 Télécommunication. Télégraphie. Téléphonie. Radiocommunication. Technologie et équipement vidéo. Télécontrôle
621.391 Notions générales sur l'ingénierie des communications électriques. Cybernétique. Théorie de l'information, théorie des signaux (en connexion avec la technique des télécommunications électriques)
621.391.82 Perturbations.Interférence.Statique
621.391.837 Qualité de l'image due aux transducteurs de transmission et de réception. Résolution de l'image. Fantômes. Distorsion géométrique. Brillance. Contraste. Effets dynamiques. Modèle d'interférence...
621.396 Appareils et méthodes de radio-communication(radio).
621.396.67 Antennes. Antennes radio. Système de mise en terre
621.396.96 Radar ( (radiolocalisation)
621.397 Technologie vidéo. Ingénierie de la télévision. Enregistrement vidéo, transmission et reproduction. Equipements et réseau vidéo
621.397.13 Télévision
621.4 Moteurs thermiques
621.43 moteurs à combustion interne. Moteurs à explosions
621.436.1 Moteurs Diesel dans le sens étroit du mot
621.438 Turbines de combustion. Turbines à gaz. Turbines à huile
621.45 Moteurs à réaction . Réacteurs
621.47
621.48
621.51 Compression et impulsion de l'air et autres gaz. Compresseurs. Ventilateur à haute pression
621.52 Réfaction de l'air et des autres gaz. Pompes à air. Exhausteur. Raréfacteur. Pompes à vide
621.56 Réfrigération en général. Production de basse température
621.64 Installation de stockage et de distribution des fluides. Conteneurs, conduits, tuyaux.
621.67 Pompes centrifuges et turbo-pompes
621.7 Technologie mécanique en général. Procédés. Outillages. Machines. Equipement
621.74 Travail de fonderie. Disposition et équipement de la fonderie. Moulage et fusion
621.762 Métallurgie des poudres
621.791 Soudure et techniques analogues
621.791/.792 Assemblage des matériaux
621.793/795 Traitement de finition des surfaces
621.8
621.861 Poulies et palans. Appareil de levage. Palans
621.865.8 Manipulateurs, robots industriels
621.89 Lubrification. Lubrifiants. Dispositifs de lubrification
621.891 Généralités. Frottement dans les machines. Propriétés des lubrifiants
621.9
621/336
621/530
621/621.3/621.48
621/651.8
621.01 Théorie de l'ingénierie mécanique. La mécanique comme base de l'ingénierie mécanique
621.039 Science nucléaire appliquée. Energie atomique et industrie atomique. Ingénierie nucléaire en général
621.042
621.2/621.5
621.22 Energie hydraulique. Force hydraulique. Machines hydrauliques
621.224 Turbines hydraulique. Force hydraulique. Machines hydrauliques
621.3 Ingénierie électrique
621.3.038 équipements électrique
621.3.049 Construction de circuit électrique
621.3/016
621.3/530
621.3/537
621.31 Production,approvisionnement et contrôle de l'électricité.Machines et appareils électriques.Mesure électrique.Magnétisme et électrostatique appliquées
621.311 Production et approvisionnement en énergie électrique. Usines génératrices. Systèmes, équipement et disposition d'approvisionnement en énergie électrique. Schémas d'électrification
621.311 TEC Production et approvisionnemnt en énergie électrique. Usines génératrices. Système, équipement et disposition d'approvisionnement en énergie électrique.Usines génératrices.systémes ,équipement en énergie électrique. Schémas d'électrification
621.311.1 Résaux d'approvisionnement du point de vue de la distribution d'énergie .Résaux et grilles régionaux.Districts d'approvisionnet.Sous-stations.Schémas d'électrification
621.311.24 Industrie de énergétique au départ de sources d'énergie naturelles
621.311.243 Industrie de l'énergie solaire. Collecteurs solaires (systèmes de miroirs, fours solaires). Piles photovoltaïques
621.311.25 Industrie de l'énergie nucléaire (atomique)
621.313 Machines électriques
621.313.13 Machines électriques. Moteurs
621.314.5 Transformation du courant alternatif en courant continu et inversement. Convertisseurs. Inverseurs
621.315 Transmission de l'énergie électrique. Distribution de l'énergie et lignes de télécommunication
621.315.5 Conducteurs et semi-conducteurs selon le matériau
621.315.6 Mtériaux isolants
621.315.61 Matériaux isolants. Matériaux diélectriques
621.317 Mesure électrique (appareils et instruments)
621.317.3 Mesure des grandeurs électriques
621.317.34 Mesure des caractéristiques de transmission des réseaux et des lignes
621.318 Magnétisme appliqué.Matériaux et appareils magnétiques. Bobines.Relais
621.318.1 Matériaux magnétiques en général
621.319.1 Ferro-électricité appliquée réseaux
621.319/001.64
621.32 Sources de lumiére électrique
621.34
621.34/551.4
621.34/621.38
621.34/624
621.34/624/621.38
621.34/624/660
621.355.2 Accumulateurs en plomb (acide-plomb) en générale
621.357 Electrochimie industrielle . Electrolyse . Electrodéposition
621.36 Thermoélectricité.Chauffage électrique production d'électricité par la chaleur.Générateur thermoélectriques
621.36/7/05
621.362 Production d'électricité par la chaleur. Générateurs thermoélectriques
621.37 Technique des ondes électriques, des ondes électromagnétiques, des oscillations et impulsions électriques
621.377 Dispositifs électriques de stockage de l'information (mémoires)
621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X
621.38/621.381
621.38/629.13
621.381
621.381/001
621.381/001.6
621.382 Dispositifs électroniques utilisant les effets des corps solides. Dispositifs semi-conducteurs
621.385.833 Microscope électronique. Caméras de diffraction.
621.39 Télécommunication. Télégraphie. Téléphonie. Radiocommunication. Technologie et équipement vidéo. Télécontrôle
621.391 Notions générales sur l'ingénierie des communications électriques. Cybernétique. Théorie de l'information, théorie des signaux (en connexion avec la technique des télécommunications électriques)
621.391.82 Perturbations.Interférence.Statique
621.391.837 Qualité de l'image due aux transducteurs de transmission et de réception. Résolution de l'image. Fantômes. Distorsion géométrique. Brillance. Contraste. Effets dynamiques. Modèle d'interférence...
621.396 Appareils et méthodes de radio-communication(radio).
621.396.67 Antennes. Antennes radio. Système de mise en terre
621.396.96 Radar ( (radiolocalisation)
621.397 Technologie vidéo. Ingénierie de la télévision. Enregistrement vidéo, transmission et reproduction. Equipements et réseau vidéo
621.397.13 Télévision
621.4 Moteurs thermiques
621.43 moteurs à combustion interne. Moteurs à explosions
621.436.1 Moteurs Diesel dans le sens étroit du mot
621.438 Turbines de combustion. Turbines à gaz. Turbines à huile
621.45 Moteurs à réaction . Réacteurs
621.47
621.48
621.51 Compression et impulsion de l'air et autres gaz. Compresseurs. Ventilateur à haute pression
621.52 Réfaction de l'air et des autres gaz. Pompes à air. Exhausteur. Raréfacteur. Pompes à vide
621.56 Réfrigération en général. Production de basse température
621.64 Installation de stockage et de distribution des fluides. Conteneurs, conduits, tuyaux.
621.67 Pompes centrifuges et turbo-pompes
621.7 Technologie mécanique en général. Procédés. Outillages. Machines. Equipement
621.74 Travail de fonderie. Disposition et équipement de la fonderie. Moulage et fusion
621.762 Métallurgie des poudres
621.791 Soudure et techniques analogues
621.791/.792 Assemblage des matériaux
621.793/795 Traitement de finition des surfaces
621.8
621.861 Poulies et palans. Appareil de levage. Palans
621.865.8 Manipulateurs, robots industriels
621.89 Lubrification. Lubrifiants. Dispositifs de lubrification
621.891 Généralités. Frottement dans les machines. Propriétés des lubrifiants
621.9
621/336
621/530
621/621.3/621.48
621/651.8
Ouvrages de la bibliothèque en indexation 621.5
Affiner la rechercheTribological behaviors of PTFE-based composites filled with nanoscale lamellar structure expanded graphite / Yu-lin Yang in Transactions of the ASME . Journal of tribology, Vol. 132 N° 3 (Juillet 2010)
[article]
in Transactions of the ASME . Journal of tribology > Vol. 132 N° 3 (Juillet 2010) . - 07 p.
Titre : Tribological behaviors of PTFE-based composites filled with nanoscale lamellar structure expanded graphite Type de document : texte imprimé Auteurs : Yu-lin Yang, Auteur ; Zhi-ning Jia, Auteur ; Jin-jiang Chen, Auteur Année de publication : 2011 Article en page(s) : 07 p. Note générale : Tribology Langues : Anglais (eng) Mots-clés : Field emission electron microscopy Filled polymers Friction Graphite Nanocomposites Scanning electron microscopy Surface morphology Wear resistance Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : This paper provides a polytetrafluoroethylene (PTFE)/nano-EG solid self-lubricating composite that exhibits very low friction coefficient and wear rate. In present study, the influences of the content of expanded graphite with nanoscale lamellar structure (nano-EG) in PTFE/nano-EG composite, normal contact pressure, and sliding velocity on tribological properties were studied by using the MMU-5G friction and wear tester sliding against AISI-1045 steel. Meanwhile, the property of nano-EG was characterized by utilizing a field emission scanning electron microscope. Compared with that of pure PTFE, the addition of nano-EG into PTFE matrix effectively improved the antifriction and wear resistance properties of PTFE/nano-EG composite. The highest wear resistance was found for the PTFE/nano-EG composite filled with 15 wt % nano-EG. The morphologies of worn surface of the ANSI-1045 steel and composites were observed using a confocal laser scanning microscopy (CLSM) and a scanning electron microscope (SEM) to examine composite microstructures and to study modes of failure. The images of CLSM and SEM indicate that the property of transfer film generated on the surface of mating pair is likely responsible for the lower wear rate observed in these experiments. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] [article] Tribological behaviors of PTFE-based composites filled with nanoscale lamellar structure expanded graphite [texte imprimé] / Yu-lin Yang, Auteur ; Zhi-ning Jia, Auteur ; Jin-jiang Chen, Auteur . - 2011 . - 07 p.
Tribology
Langues : Anglais (eng)
in Transactions of the ASME . Journal of tribology > Vol. 132 N° 3 (Juillet 2010) . - 07 p.
Mots-clés : Field emission electron microscopy Filled polymers Friction Graphite Nanocomposites Scanning electron microscopy Surface morphology Wear resistance Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : This paper provides a polytetrafluoroethylene (PTFE)/nano-EG solid self-lubricating composite that exhibits very low friction coefficient and wear rate. In present study, the influences of the content of expanded graphite with nanoscale lamellar structure (nano-EG) in PTFE/nano-EG composite, normal contact pressure, and sliding velocity on tribological properties were studied by using the MMU-5G friction and wear tester sliding against AISI-1045 steel. Meanwhile, the property of nano-EG was characterized by utilizing a field emission scanning electron microscope. Compared with that of pure PTFE, the addition of nano-EG into PTFE matrix effectively improved the antifriction and wear resistance properties of PTFE/nano-EG composite. The highest wear resistance was found for the PTFE/nano-EG composite filled with 15 wt % nano-EG. The morphologies of worn surface of the ANSI-1045 steel and composites were observed using a confocal laser scanning microscopy (CLSM) and a scanning electron microscope (SEM) to examine composite microstructures and to study modes of failure. The images of CLSM and SEM indicate that the property of transfer film generated on the surface of mating pair is likely responsible for the lower wear rate observed in these experiments. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] Tribological characteristics modification of magnetorheological fluid / Chul Hee Lee in Transactions of the ASME . Journal of tribology, Vol. 133 N° 3 (Juillet 2011)
[article]
in Transactions of the ASME . Journal of tribology > Vol. 133 N° 3 (Juillet 2011) . - 06 p.
Titre : Tribological characteristics modification of magnetorheological fluid Type de document : texte imprimé Auteurs : Chul Hee Lee, Auteur ; Deuk Won Lee, Auteur ; Jae Young Choi, Auteur Année de publication : 2012 Article en page(s) : 06 p. Note générale : Tribology Langues : Anglais (eng) Mots-clés : Carbon steel Differential scanning calorimetry Friction Magnetic fluids Magnetorheology Scanning electron microscopy Surface roughness Wear Wear testing Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Recently, research on the application of magnetorheological (MR) fluid in mechanical engineering has been widely expanded, while the performance of MR fluid in tribology has also been investigated. In this study, a modification of MR fluid, which is modified by adding certain additives, is attempted to improve tribological performance. After modification, wear and friction are measured by four-ball wear tester and linear-oscillation (SRV) tester under no magnetic fields. Subsequently, the oxidation induction time (OIT) is evaluated by pressure differential scanning calorimetry (PDSC). Then, to observe the tribological performance under magnetic fields, pin-on-disk test is conducted to confirm the effects of the commercial MR fluid and modified MR fluid on friction and wear in different operating and magnetic conditions. Also, the modification effects on surface roughness are investigated by using a profilometer. Moreover, the microscopic changes of surfaces and MR particles are investigated by using scanning electron microscopy (SEM). DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] [article] Tribological characteristics modification of magnetorheological fluid [texte imprimé] / Chul Hee Lee, Auteur ; Deuk Won Lee, Auteur ; Jae Young Choi, Auteur . - 2012 . - 06 p.
Tribology
Langues : Anglais (eng)
in Transactions of the ASME . Journal of tribology > Vol. 133 N° 3 (Juillet 2011) . - 06 p.
Mots-clés : Carbon steel Differential scanning calorimetry Friction Magnetic fluids Magnetorheology Scanning electron microscopy Surface roughness Wear Wear testing Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Recently, research on the application of magnetorheological (MR) fluid in mechanical engineering has been widely expanded, while the performance of MR fluid in tribology has also been investigated. In this study, a modification of MR fluid, which is modified by adding certain additives, is attempted to improve tribological performance. After modification, wear and friction are measured by four-ball wear tester and linear-oscillation (SRV) tester under no magnetic fields. Subsequently, the oxidation induction time (OIT) is evaluated by pressure differential scanning calorimetry (PDSC). Then, to observe the tribological performance under magnetic fields, pin-on-disk test is conducted to confirm the effects of the commercial MR fluid and modified MR fluid on friction and wear in different operating and magnetic conditions. Also, the modification effects on surface roughness are investigated by using a profilometer. Moreover, the microscopic changes of surfaces and MR particles are investigated by using scanning electron microscopy (SEM). DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] Tribological characteristics of deformed magnesium alloy AZ61 under dry conditions / Abdel-Wahab El-Morsy in Transactions of the ASME . Journal of tribology, Vol. 133 N° 4 (Octobre 2011)
[article]
in Transactions of the ASME . Journal of tribology > Vol. 133 N° 4 (Octobre 2011) . - 08 p.
Titre : Tribological characteristics of deformed magnesium alloy AZ61 under dry conditions Type de document : texte imprimé Auteurs : Abdel-Wahab El-Morsy, Auteur ; A. Abouel-Kasem, Auteur Année de publication : 2012 Article en page(s) : 08 p. Note générale : Tribology Langues : Anglais (eng) Mots-clés : Deformation Drying Extrusion Fractals Internal stresses Magnesium alloys Stainless steel Wear Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : The wear behavior of deformed magnesium alloy AZ61 under dry conditions was evaluated. Two types of AZ61 alloy were used, extruded and rolled samples, to investigate the effect of deformation process on the wear behavior. The experiments were performed using a pin-on-ring type wear apparatus against a stainless-steel counterface under applied stresses in the range of 3–7 MPa, and within a sliding velocity range of 0.2–1.8 m/s. The topographical images of the eroded surfaces at different sliding velocity for extruded and rolled samples were quantified using fractal analysis. The results revealed that for all applied stress, the wear rates increased with increasing the sliding velocity of both samples. The wear rate of the rolled samples is greater than that of the extruded samples at the stress range from 3 to 5 MPa. However, when the stress is increased to 7 MPa the wear rate of the rolled samples is lower than that of the extruded samples. The variation of fractal value of slope of linearized power spectral density (PSD) with the sliding velocity is largely similar to the relationship between the wear rate and the sliding velocity. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] [article] Tribological characteristics of deformed magnesium alloy AZ61 under dry conditions [texte imprimé] / Abdel-Wahab El-Morsy, Auteur ; A. Abouel-Kasem, Auteur . - 2012 . - 08 p.
Tribology
Langues : Anglais (eng)
in Transactions of the ASME . Journal of tribology > Vol. 133 N° 4 (Octobre 2011) . - 08 p.
Mots-clés : Deformation Drying Extrusion Fractals Internal stresses Magnesium alloys Stainless steel Wear Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : The wear behavior of deformed magnesium alloy AZ61 under dry conditions was evaluated. Two types of AZ61 alloy were used, extruded and rolled samples, to investigate the effect of deformation process on the wear behavior. The experiments were performed using a pin-on-ring type wear apparatus against a stainless-steel counterface under applied stresses in the range of 3–7 MPa, and within a sliding velocity range of 0.2–1.8 m/s. The topographical images of the eroded surfaces at different sliding velocity for extruded and rolled samples were quantified using fractal analysis. The results revealed that for all applied stress, the wear rates increased with increasing the sliding velocity of both samples. The wear rate of the rolled samples is greater than that of the extruded samples at the stress range from 3 to 5 MPa. However, when the stress is increased to 7 MPa the wear rate of the rolled samples is lower than that of the extruded samples. The variation of fractal value of slope of linearized power spectral density (PSD) with the sliding velocity is largely similar to the relationship between the wear rate and the sliding velocity. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] Tribological characteristics of three novel imidazoline-type thiadiazole derivatives in colza oil and synthetic diester / Lin Shui in Transactions of the ASME . Journal of tribology, Vol. 134 N° 3 (Juillet 2012)
[article]
in Transactions of the ASME . Journal of tribology > Vol. 134 N° 3 (Juillet 2012) . - 08 p.
Titre : Tribological characteristics of three novel imidazoline-type thiadiazole derivatives in colza oil and synthetic diester Type de document : texte imprimé Auteurs : Lin Shui, Auteur ; Yi Zhou, Auteur ; Guoru Zhang, Auteur Année de publication : 2012 Article en page(s) : 08 p. Note générale : tribology Langues : Anglais (eng) Mots-clés : lubricant additives; colza oil; synthetic diester; additive-deposited films; XANES Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Owing to the requests of exploring environment-friendly and multifunctional lubricant additives, three novel imidazoline-type thiadiazole derivatives are prepared and used as lubricant additives in two biodegradable base stocks, colza oil and synthetic diester, respectively, and their tribological performance is tested using the four-ball tester. For further understanding of their tribological behaviors, x-ray absorption near edge structure (XANES) spectroscopy is adopted to analyze the thermal films and tribofilms generated from these additives in two base stocks. Tribological tests show that all these thiadiazole derivatives are effective in reducing wear in synthetic diester, and derivative SIB (stearic acid-imidazoline-type thiadiazole derivative) is better than derivative OIB (oleic acid-imidazoline-type thiadiazole derivative) and derivative DIB (lauric acid-imidazoline-type thiadiazole derivative) in reducing friction at high additive concentrations. But these derivatives almost fail in improving the tribological characteristic of colza oil. According to XANES spectra, thermal films formed in two base stocks are mainly composed of ferrous sulfate and adsorbed organic sulfide. These derivatives are also easily oxidized into high-valent sulfate in colza oil during the rubbing process, and ferrous sulfate is the main component of these tribofilms. But in synthetic diester, tribofilms are mainly composed of ferrous sulfide, and it is notable that the tribofilm generated by derivative SIB at 1.0 wt. % is composed of ferrous sulfide and ferrous disulfide. Under extreme-pressure conditions, these derivatives easily react with the metallic surface to generate ferrous sulfide in colza oil. But in synthetic diester, adsorbed organic sulfide is the main component of those films. The base stock has a great impact on the compositions of these reaction films, so the tribological behaviors of these derivatives are different in two base stocks. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE9000134000003 [...] [article] Tribological characteristics of three novel imidazoline-type thiadiazole derivatives in colza oil and synthetic diester [texte imprimé] / Lin Shui, Auteur ; Yi Zhou, Auteur ; Guoru Zhang, Auteur . - 2012 . - 08 p.
tribology
Langues : Anglais (eng)
in Transactions of the ASME . Journal of tribology > Vol. 134 N° 3 (Juillet 2012) . - 08 p.
Mots-clés : lubricant additives; colza oil; synthetic diester; additive-deposited films; XANES Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Owing to the requests of exploring environment-friendly and multifunctional lubricant additives, three novel imidazoline-type thiadiazole derivatives are prepared and used as lubricant additives in two biodegradable base stocks, colza oil and synthetic diester, respectively, and their tribological performance is tested using the four-ball tester. For further understanding of their tribological behaviors, x-ray absorption near edge structure (XANES) spectroscopy is adopted to analyze the thermal films and tribofilms generated from these additives in two base stocks. Tribological tests show that all these thiadiazole derivatives are effective in reducing wear in synthetic diester, and derivative SIB (stearic acid-imidazoline-type thiadiazole derivative) is better than derivative OIB (oleic acid-imidazoline-type thiadiazole derivative) and derivative DIB (lauric acid-imidazoline-type thiadiazole derivative) in reducing friction at high additive concentrations. But these derivatives almost fail in improving the tribological characteristic of colza oil. According to XANES spectra, thermal films formed in two base stocks are mainly composed of ferrous sulfate and adsorbed organic sulfide. These derivatives are also easily oxidized into high-valent sulfate in colza oil during the rubbing process, and ferrous sulfate is the main component of these tribofilms. But in synthetic diester, tribofilms are mainly composed of ferrous sulfide, and it is notable that the tribofilm generated by derivative SIB at 1.0 wt. % is composed of ferrous sulfide and ferrous disulfide. Under extreme-pressure conditions, these derivatives easily react with the metallic surface to generate ferrous sulfide in colza oil. But in synthetic diester, adsorbed organic sulfide is the main component of those films. The base stock has a great impact on the compositions of these reaction films, so the tribological behaviors of these derivatives are different in two base stocks. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE9000134000003 [...] Tribological properties of steel and steel lubricated with a poly-alpha-olefin containing schiff base copper complex / Xinlei Gao in Transactions of the ASME . Journal of tribology, Vol. 134 N° 3 (Juillet 2012)
[article]
in Transactions of the ASME . Journal of tribology > Vol. 134 N° 3 (Juillet 2012) . - 08 p.
Titre : Tribological properties of steel and steel lubricated with a poly-alpha-olefin containing schiff base copper complex Type de document : texte imprimé Auteurs : Xinlei Gao, Auteur ; Jian Li, Auteur ; Wanzhen Gao, Auteur Année de publication : 2012 Article en page(s) : 08 p. Note générale : tribology Langues : Anglais (eng) Mots-clés : friction and wear; poly-x-olefin; schiff base copper complex; tribofilm Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Poly-alpha-olefin (PAO) is an important synthetic fluid in the field of industry lubricants. To improve the tribological properties of PAO, a Schiff base copper complex was added to the lubricants. The tribological properties of steel and steel lubricated with PAO and PAOs containing a Schiff base copper complex were studied. The friction and wear properties of steel and steel lubricated with PAO and PAOs containing a Schiff base copper complex were evaluated using a SST-ST pin-disc tester. The sliding friction was measured using lubricants with or without a Schiff base copper complex and analyzed using surface analysis techniques including scanning electron microscopy, Fourier transform infrared spectroscopy, and confocal white light microscopy. A UMT-2 universal tribometer was also used to study the tribological properties of modifying PAO containing the Schiff base copper complex. The Schiff base copper complex structure was found to assist in the formation of a stronger tribofilm; more than the tribofilm prepared by lubricating only with PAO and this is crucial in obtaining a low and stable coefficient of friction. A lower stable friction coefficient and wear was found for the steel/steel surface contact when using the PAOs containing the Schiff base copper complex compared to the samples lubricated with the PAO without additives. The excellent tribological performance of the PAOs containing the Schiff base copper complex is attributed to the formation of a useful tribofilm with organic and inorganic groups on the sliding surface. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE9000134000003 [...] [article] Tribological properties of steel and steel lubricated with a poly-alpha-olefin containing schiff base copper complex [texte imprimé] / Xinlei Gao, Auteur ; Jian Li, Auteur ; Wanzhen Gao, Auteur . - 2012 . - 08 p.
tribology
Langues : Anglais (eng)
in Transactions of the ASME . Journal of tribology > Vol. 134 N° 3 (Juillet 2012) . - 08 p.
Mots-clés : friction and wear; poly-x-olefin; schiff base copper complex; tribofilm Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Poly-alpha-olefin (PAO) is an important synthetic fluid in the field of industry lubricants. To improve the tribological properties of PAO, a Schiff base copper complex was added to the lubricants. The tribological properties of steel and steel lubricated with PAO and PAOs containing a Schiff base copper complex were studied. The friction and wear properties of steel and steel lubricated with PAO and PAOs containing a Schiff base copper complex were evaluated using a SST-ST pin-disc tester. The sliding friction was measured using lubricants with or without a Schiff base copper complex and analyzed using surface analysis techniques including scanning electron microscopy, Fourier transform infrared spectroscopy, and confocal white light microscopy. A UMT-2 universal tribometer was also used to study the tribological properties of modifying PAO containing the Schiff base copper complex. The Schiff base copper complex structure was found to assist in the formation of a stronger tribofilm; more than the tribofilm prepared by lubricating only with PAO and this is crucial in obtaining a low and stable coefficient of friction. A lower stable friction coefficient and wear was found for the steel/steel surface contact when using the PAOs containing the Schiff base copper complex compared to the samples lubricated with the PAO without additives. The excellent tribological performance of the PAOs containing the Schiff base copper complex is attributed to the formation of a useful tribofilm with organic and inorganic groups on the sliding surface. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE9000134000003 [...] Tribological testing of steel coupons bonded to cu-based microchannel heat exchangers / Fanghua Mei in Transactions of the ASME . Journal of tribology, Vol. 133 N° 3 (Juillet 2011)
PermalinkA two-phase flow approach for the outlet of lubricated line contacts / V. Bruyere in Transactions of the ASME . Journal of tribology, Vol. 134 N° 04 (Octobre 2012)
PermalinkUltrasonic measurement for film thickness and solid contact in elastohydrodynamic lubrication / R. S. Dwyer-Joyce in Transactions of the ASME . Journal of tribology, Vol. 133 N° 3 (Juillet 2011)
PermalinkUnderstanding friction behavior in automatic transmission fluid LVFA test / Hongyuan Zhao in Transactions of the ASME . Journal of tribology, Vol. 133 N° 2 (Avril 2011)
PermalinkUse of variable geometry ejector with cold store to achieve high solar fraction for solar cooling / M. Dennis in International journal of refrigeration, Vol. 34 N° 7 (Novembre 2011)
PermalinkVertical ground coupled steam ejector heat pump; thermal-economic modeling and optimization / Sepehr Sanaye in International journal of refrigeration, Vol. 34 N° 7 (Novembre 2011)
PermalinkVertical stiffnesses of preloaded linear guideway type ball bearings incorporating the flexibility of the carriage and rail / Ohta, Hiroyuki in Transactions of the ASME . Journal of tribology, Vol. 132 N° 1 (Janvier 2010)
PermalinkVibration and acoustic emission of linear-guideway type recirculating ball bearings with a millimeter-sized artificial defect in the carriage / Ohta, Hiroyuki in Transactions of the ASME . Journal of tribology, Vol. 132 N° 1 (Janvier 2010)
PermalinkVisco-elastohydrodynamic model of a hydraulic rod seal during transient operation / Azam Thatte in Transactions of the ASME . Journal of tribology, Vol. 132 N° 4 (Octobre 2010)
PermalinkA voronoi FE fatigue damage model for life scatter in rolling contacts / Behrooz Jalalahmadi in Transactions of the ASME . Journal of tribology, Vol. 132 N° 2 (Avril 2010)
Permalink