Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'indexation
621.5 : Energie pneumatique. Machinerie et outils. Réfrigération
621 Ingénierie mécanique en général. Technologie nucléaire. Ingénierie électrique. Machinerie
621.01 Théorie de l'ingénierie mécanique. La mécanique comme base de l'ingénierie mécanique
621.039 Science nucléaire appliquée. Energie atomique et industrie atomique. Ingénierie nucléaire en général
621.042
621.2/621.5
621.22 Energie hydraulique. Force hydraulique. Machines hydrauliques
621.224 Turbines hydraulique. Force hydraulique. Machines hydrauliques
621.3 Ingénierie électrique
621.3.038 équipements électrique
621.3.049 Construction de circuit électrique
621.3/016
621.3/530
621.3/537
621.31 Production,approvisionnement et contrôle de l'électricité.Machines et appareils électriques.Mesure électrique.Magnétisme et électrostatique appliquées
621.311 Production et approvisionnement en énergie électrique. Usines génératrices. Systèmes, équipement et disposition d'approvisionnement en énergie électrique. Schémas d'électrification
621.311 TEC Production et approvisionnemnt en énergie électrique. Usines génératrices. Système, équipement et disposition d'approvisionnement en énergie électrique.Usines génératrices.systémes ,équipement en énergie électrique. Schémas d'électrification
621.311.1 Résaux d'approvisionnement du point de vue de la distribution d'énergie .Résaux et grilles régionaux.Districts d'approvisionnet.Sous-stations.Schémas d'électrification
621.311.24 Industrie de énergétique au départ de sources d'énergie naturelles
621.311.243 Industrie de l'énergie solaire. Collecteurs solaires (systèmes de miroirs, fours solaires). Piles photovoltaïques
621.311.25 Industrie de l'énergie nucléaire (atomique)
621.313 Machines électriques
621.313.13 Machines électriques. Moteurs
621.314.5 Transformation du courant alternatif en courant continu et inversement. Convertisseurs. Inverseurs
621.315 Transmission de l'énergie électrique. Distribution de l'énergie et lignes de télécommunication
621.315.5 Conducteurs et semi-conducteurs selon le matériau
621.315.6 Mtériaux isolants
621.315.61 Matériaux isolants. Matériaux diélectriques
621.317 Mesure électrique (appareils et instruments)
621.317.3 Mesure des grandeurs électriques
621.317.34 Mesure des caractéristiques de transmission des réseaux et des lignes
621.318 Magnétisme appliqué.Matériaux et appareils magnétiques. Bobines.Relais
621.318.1 Matériaux magnétiques en général
621.319.1 Ferro-électricité appliquée réseaux
621.319/001.64
621.32 Sources de lumiére électrique
621.34
621.34/551.4
621.34/621.38
621.34/624
621.34/624/621.38
621.34/624/660
621.355.2 Accumulateurs en plomb (acide-plomb) en générale
621.357 Electrochimie industrielle . Electrolyse . Electrodéposition
621.36 Thermoélectricité.Chauffage électrique production d'électricité par la chaleur.Générateur thermoélectriques
621.36/7/05
621.362 Production d'électricité par la chaleur. Générateurs thermoélectriques
621.37 Technique des ondes électriques, des ondes électromagnétiques, des oscillations et impulsions électriques
621.377 Dispositifs électriques de stockage de l'information (mémoires)
621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X
621.38/621.381
621.38/629.13
621.381
621.381/001
621.381/001.6
621.382 Dispositifs électroniques utilisant les effets des corps solides. Dispositifs semi-conducteurs
621.385.833 Microscope électronique. Caméras de diffraction.
621.39 Télécommunication. Télégraphie. Téléphonie. Radiocommunication. Technologie et équipement vidéo. Télécontrôle
621.391 Notions générales sur l'ingénierie des communications électriques. Cybernétique. Théorie de l'information, théorie des signaux (en connexion avec la technique des télécommunications électriques)
621.391.82 Perturbations.Interférence.Statique
621.391.837 Qualité de l'image due aux transducteurs de transmission et de réception. Résolution de l'image. Fantômes. Distorsion géométrique. Brillance. Contraste. Effets dynamiques. Modèle d'interférence...
621.396 Appareils et méthodes de radio-communication(radio).
621.396.67 Antennes. Antennes radio. Système de mise en terre
621.396.96 Radar ( (radiolocalisation)
621.397 Technologie vidéo. Ingénierie de la télévision. Enregistrement vidéo, transmission et reproduction. Equipements et réseau vidéo
621.397.13 Télévision
621.4 Moteurs thermiques
621.43 moteurs à combustion interne. Moteurs à explosions
621.436.1 Moteurs Diesel dans le sens étroit du mot
621.438 Turbines de combustion. Turbines à gaz. Turbines à huile
621.45 Moteurs à réaction . Réacteurs
621.47
621.48
621.51 Compression et impulsion de l'air et autres gaz. Compresseurs. Ventilateur à haute pression
621.52 Réfaction de l'air et des autres gaz. Pompes à air. Exhausteur. Raréfacteur. Pompes à vide
621.56 Réfrigération en général. Production de basse température
621.64 Installation de stockage et de distribution des fluides. Conteneurs, conduits, tuyaux.
621.67 Pompes centrifuges et turbo-pompes
621.7 Technologie mécanique en général. Procédés. Outillages. Machines. Equipement
621.74 Travail de fonderie. Disposition et équipement de la fonderie. Moulage et fusion
621.762 Métallurgie des poudres
621.791 Soudure et techniques analogues
621.791/.792 Assemblage des matériaux
621.793/795 Traitement de finition des surfaces
621.8
621.861 Poulies et palans. Appareil de levage. Palans
621.865.8 Manipulateurs, robots industriels
621.89 Lubrification. Lubrifiants. Dispositifs de lubrification
621.891 Généralités. Frottement dans les machines. Propriétés des lubrifiants
621.9
621/336
621/530
621/621.3/621.48
621/651.8
621.01 Théorie de l'ingénierie mécanique. La mécanique comme base de l'ingénierie mécanique
621.039 Science nucléaire appliquée. Energie atomique et industrie atomique. Ingénierie nucléaire en général
621.042
621.2/621.5
621.22 Energie hydraulique. Force hydraulique. Machines hydrauliques
621.224 Turbines hydraulique. Force hydraulique. Machines hydrauliques
621.3 Ingénierie électrique
621.3.038 équipements électrique
621.3.049 Construction de circuit électrique
621.3/016
621.3/530
621.3/537
621.31 Production,approvisionnement et contrôle de l'électricité.Machines et appareils électriques.Mesure électrique.Magnétisme et électrostatique appliquées
621.311 Production et approvisionnement en énergie électrique. Usines génératrices. Systèmes, équipement et disposition d'approvisionnement en énergie électrique. Schémas d'électrification
621.311 TEC Production et approvisionnemnt en énergie électrique. Usines génératrices. Système, équipement et disposition d'approvisionnement en énergie électrique.Usines génératrices.systémes ,équipement en énergie électrique. Schémas d'électrification
621.311.1 Résaux d'approvisionnement du point de vue de la distribution d'énergie .Résaux et grilles régionaux.Districts d'approvisionnet.Sous-stations.Schémas d'électrification
621.311.24 Industrie de énergétique au départ de sources d'énergie naturelles
621.311.243 Industrie de l'énergie solaire. Collecteurs solaires (systèmes de miroirs, fours solaires). Piles photovoltaïques
621.311.25 Industrie de l'énergie nucléaire (atomique)
621.313 Machines électriques
621.313.13 Machines électriques. Moteurs
621.314.5 Transformation du courant alternatif en courant continu et inversement. Convertisseurs. Inverseurs
621.315 Transmission de l'énergie électrique. Distribution de l'énergie et lignes de télécommunication
621.315.5 Conducteurs et semi-conducteurs selon le matériau
621.315.6 Mtériaux isolants
621.315.61 Matériaux isolants. Matériaux diélectriques
621.317 Mesure électrique (appareils et instruments)
621.317.3 Mesure des grandeurs électriques
621.317.34 Mesure des caractéristiques de transmission des réseaux et des lignes
621.318 Magnétisme appliqué.Matériaux et appareils magnétiques. Bobines.Relais
621.318.1 Matériaux magnétiques en général
621.319.1 Ferro-électricité appliquée réseaux
621.319/001.64
621.32 Sources de lumiére électrique
621.34
621.34/551.4
621.34/621.38
621.34/624
621.34/624/621.38
621.34/624/660
621.355.2 Accumulateurs en plomb (acide-plomb) en générale
621.357 Electrochimie industrielle . Electrolyse . Electrodéposition
621.36 Thermoélectricité.Chauffage électrique production d'électricité par la chaleur.Générateur thermoélectriques
621.36/7/05
621.362 Production d'électricité par la chaleur. Générateurs thermoélectriques
621.37 Technique des ondes électriques, des ondes électromagnétiques, des oscillations et impulsions électriques
621.377 Dispositifs électriques de stockage de l'information (mémoires)
621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X
621.38/621.381
621.38/629.13
621.381
621.381/001
621.381/001.6
621.382 Dispositifs électroniques utilisant les effets des corps solides. Dispositifs semi-conducteurs
621.385.833 Microscope électronique. Caméras de diffraction.
621.39 Télécommunication. Télégraphie. Téléphonie. Radiocommunication. Technologie et équipement vidéo. Télécontrôle
621.391 Notions générales sur l'ingénierie des communications électriques. Cybernétique. Théorie de l'information, théorie des signaux (en connexion avec la technique des télécommunications électriques)
621.391.82 Perturbations.Interférence.Statique
621.391.837 Qualité de l'image due aux transducteurs de transmission et de réception. Résolution de l'image. Fantômes. Distorsion géométrique. Brillance. Contraste. Effets dynamiques. Modèle d'interférence...
621.396 Appareils et méthodes de radio-communication(radio).
621.396.67 Antennes. Antennes radio. Système de mise en terre
621.396.96 Radar ( (radiolocalisation)
621.397 Technologie vidéo. Ingénierie de la télévision. Enregistrement vidéo, transmission et reproduction. Equipements et réseau vidéo
621.397.13 Télévision
621.4 Moteurs thermiques
621.43 moteurs à combustion interne. Moteurs à explosions
621.436.1 Moteurs Diesel dans le sens étroit du mot
621.438 Turbines de combustion. Turbines à gaz. Turbines à huile
621.45 Moteurs à réaction . Réacteurs
621.47
621.48
621.51 Compression et impulsion de l'air et autres gaz. Compresseurs. Ventilateur à haute pression
621.52 Réfaction de l'air et des autres gaz. Pompes à air. Exhausteur. Raréfacteur. Pompes à vide
621.56 Réfrigération en général. Production de basse température
621.64 Installation de stockage et de distribution des fluides. Conteneurs, conduits, tuyaux.
621.67 Pompes centrifuges et turbo-pompes
621.7 Technologie mécanique en général. Procédés. Outillages. Machines. Equipement
621.74 Travail de fonderie. Disposition et équipement de la fonderie. Moulage et fusion
621.762 Métallurgie des poudres
621.791 Soudure et techniques analogues
621.791/.792 Assemblage des matériaux
621.793/795 Traitement de finition des surfaces
621.8
621.861 Poulies et palans. Appareil de levage. Palans
621.865.8 Manipulateurs, robots industriels
621.89 Lubrification. Lubrifiants. Dispositifs de lubrification
621.891 Généralités. Frottement dans les machines. Propriétés des lubrifiants
621.9
621/336
621/530
621/621.3/621.48
621/651.8
Ouvrages de la bibliothèque en indexation 621.5
Affiner la rechercheWater-coupled carbon dioxide microchannel gas cooler for heat pump water heaters. Part I - Experiments / Brian M. Fronk in International journal of refrigeration, Vol. 34 N° 1 (Janvier 2011)
[article]
in International journal of refrigeration > Vol. 34 N° 1 (Janvier 2011) . - pp. 7-16
Titre : Water-coupled carbon dioxide microchannel gas cooler for heat pump water heaters. Part I - Experiments Titre original : Refroidisseur de gaz à microcanaux au dioxyde de carbone pour les pompes à chaleur utilisées pour chauffer de l'eau sanitaire. Partie I - Expériences Type de document : texte imprimé Auteurs : Brian M. Fronk, Auteur ; Srinivas Garimella, Auteur Année de publication : 2011 Article en page(s) : pp. 7-16 Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Heat pump Heating Hot water Carbon dioxide Transcritical cycle Experiment Gas cooler Microchannel Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : An experimental and analytical study on the performance of a compact, microchannel water- carbon dioxide (CO2) gas cooler was conducted. The gas cooler design under investigation used an array of serpentine refrigerant microchannel tubes wrapped around water passages containing offset strip fins, resulting in a generally counterflow configuration between the two fluids. Part I of this two-part paper addresses the experimental aspects. Data were obtained using an experimental heat pump facility at varying inlet conditions for three gas coolers of the same design, but different sizes. Measured heating capacity for the three gas coolers ranged from 1.5 to 6.5 kW. The results of this study are used in the companion paper (Part II) to develop a predictive heat exchanger model to optimize gas cooler design over a wide range of operating conditions, eliminating the need for expensive prototype development and testing. DEWEY : 621.5 ISSN : 0140-7007 En ligne : http://www.sciencedirect.com/science/article/pii/S0140700710000903 [article] Water-coupled carbon dioxide microchannel gas cooler for heat pump water heaters. Part I - Experiments = Refroidisseur de gaz à microcanaux au dioxyde de carbone pour les pompes à chaleur utilisées pour chauffer de l'eau sanitaire. Partie I - Expériences [texte imprimé] / Brian M. Fronk, Auteur ; Srinivas Garimella, Auteur . - 2011 . - pp. 7-16.
Génie Mécanique
Langues : Anglais (eng)
in International journal of refrigeration > Vol. 34 N° 1 (Janvier 2011) . - pp. 7-16
Mots-clés : Heat pump Heating Hot water Carbon dioxide Transcritical cycle Experiment Gas cooler Microchannel Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : An experimental and analytical study on the performance of a compact, microchannel water- carbon dioxide (CO2) gas cooler was conducted. The gas cooler design under investigation used an array of serpentine refrigerant microchannel tubes wrapped around water passages containing offset strip fins, resulting in a generally counterflow configuration between the two fluids. Part I of this two-part paper addresses the experimental aspects. Data were obtained using an experimental heat pump facility at varying inlet conditions for three gas coolers of the same design, but different sizes. Measured heating capacity for the three gas coolers ranged from 1.5 to 6.5 kW. The results of this study are used in the companion paper (Part II) to develop a predictive heat exchanger model to optimize gas cooler design over a wide range of operating conditions, eliminating the need for expensive prototype development and testing. DEWEY : 621.5 ISSN : 0140-7007 En ligne : http://www.sciencedirect.com/science/article/pii/S0140700710000903 Water-coupled carbon dioxide microchannel gas cooler for heat pump water heaters. Part II – Model development and validation / Brian M. Fronk in International journal of refrigeration, Vol. 34 N° 1 (Janvier 2011)
[article]
in International journal of refrigeration > Vol. 34 N° 1 (Janvier 2011) . - pp. 17-28
Titre : Water-coupled carbon dioxide microchannel gas cooler for heat pump water heaters. Part II – Model development and validation Titre original : Refroidisseur de gaz à microcanaux sur eau souterraine pour des pompes à chaleur au dioxyde de carbone utilisées pour chauffer de l'eau sanitaire. Partie II – Développement et validation du modèle Type de document : texte imprimé Auteurs : Brian M. Fronk, Auteur ; Srinivas Garimella, Auteur Année de publication : 2011 Article en page(s) : pp. 17-28 Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Heat exchanger Gas cooler Carbon dioxide Transcritical cycle Microchannel Heat pump Heating Hot water Modelling Simulation Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : An experimental and analytical study on the performance of a compact, microchannel water-carbon dioxide (CO2) gas cooler was conducted. The experimental results addressed in Part I of this study are used here in Part II to develop an analytical model, utilizing a segmented approach to account for the steep gradients in the thermodynamic and transport properties of supercritical CO2. The model predicted gas cooler heat duty with an average absolute deviation of 7.5% with varying refrigerant and water inlet conditions. The segmented model reveals that near the pseudo-critical point, there is a significant local decrease in refrigerant-side thermal resistance, which yields a sharp increase in local heat duty. The impact of this spike on gas cooler performance is analyzed. Results from this study can be used to predict the effect of changing geometric parameters of the heat exchanger without the need for expensive prototype development and testing. DEWEY : 621.5 ISSN : 0140-7007 En ligne : http://www.sciencedirect.com/science/article/pii/S014070071000109X [article] Water-coupled carbon dioxide microchannel gas cooler for heat pump water heaters. Part II – Model development and validation = Refroidisseur de gaz à microcanaux sur eau souterraine pour des pompes à chaleur au dioxyde de carbone utilisées pour chauffer de l'eau sanitaire. Partie II – Développement et validation du modèle [texte imprimé] / Brian M. Fronk, Auteur ; Srinivas Garimella, Auteur . - 2011 . - pp. 17-28.
Génie Mécanique
Langues : Anglais (eng)
in International journal of refrigeration > Vol. 34 N° 1 (Janvier 2011) . - pp. 17-28
Mots-clés : Heat exchanger Gas cooler Carbon dioxide Transcritical cycle Microchannel Heat pump Heating Hot water Modelling Simulation Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : An experimental and analytical study on the performance of a compact, microchannel water-carbon dioxide (CO2) gas cooler was conducted. The experimental results addressed in Part I of this study are used here in Part II to develop an analytical model, utilizing a segmented approach to account for the steep gradients in the thermodynamic and transport properties of supercritical CO2. The model predicted gas cooler heat duty with an average absolute deviation of 7.5% with varying refrigerant and water inlet conditions. The segmented model reveals that near the pseudo-critical point, there is a significant local decrease in refrigerant-side thermal resistance, which yields a sharp increase in local heat duty. The impact of this spike on gas cooler performance is analyzed. Results from this study can be used to predict the effect of changing geometric parameters of the heat exchanger without the need for expensive prototype development and testing. DEWEY : 621.5 ISSN : 0140-7007 En ligne : http://www.sciencedirect.com/science/article/pii/S014070071000109X Wear and friction of carbon nanofiber-reinforced HDPE composites / Songbo Xu in Transactions of the ASME . Journal of tribology, Vol. 134 N° 04 (Octobre 2012)
[article]
in Transactions of the ASME . Journal of tribology > Vol. 134 N° 04 (Octobre 2012) . - 07 p.
Titre : Wear and friction of carbon nanofiber-reinforced HDPE composites Type de document : texte imprimé Auteurs : Songbo Xu, Auteur ; Aydar Akchurin, Auteur ; Tian Liu, Auteur Année de publication : 2012 Article en page(s) : 07 p. Note générale : tribology Langues : Anglais (eng) Mots-clés : carbon nanofibers; silane coating; wear; friction Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : New applications of carbon-based materials have been continuously developed in recent years. Carbon nanofibers (CNFs) with silane coatings were added into high density polyethylene (HDPE) to improve the tribological properties of the nanocomposite material. The nanocomposites were fabricated with various weight percentages of carbon nanofibers (0.5 wt.%, 1 wt.% and 3 wt.%) that were treated with different silane coating thicknesses (2.8 nm and 46 nm) through melt-mixing and compressive processing. The wear and friction tests were performed on a pin-on-disc tribometer under phosphate buffered saline lubricated condition. Compared with the neat HDPE, the friction coefficients of the nanocomposites were reduced in all samples, yet only a couple of nanocomposite samples showed lower wear rates. Micro-hardness measurements of the nanocomposites were carried out and CNFs were found to be capable of increasing the material's micro-hardness. The effects of concentration and silane coating thickness of CNFs on the tribological properties of the resulting nanocomposites were analyzed and the wear mechanisms of the HDPE/CNF nanocomposites were discussed. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE9000134000004 [...] [article] Wear and friction of carbon nanofiber-reinforced HDPE composites [texte imprimé] / Songbo Xu, Auteur ; Aydar Akchurin, Auteur ; Tian Liu, Auteur . - 2012 . - 07 p.
tribology
Langues : Anglais (eng)
in Transactions of the ASME . Journal of tribology > Vol. 134 N° 04 (Octobre 2012) . - 07 p.
Mots-clés : carbon nanofibers; silane coating; wear; friction Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : New applications of carbon-based materials have been continuously developed in recent years. Carbon nanofibers (CNFs) with silane coatings were added into high density polyethylene (HDPE) to improve the tribological properties of the nanocomposite material. The nanocomposites were fabricated with various weight percentages of carbon nanofibers (0.5 wt.%, 1 wt.% and 3 wt.%) that were treated with different silane coating thicknesses (2.8 nm and 46 nm) through melt-mixing and compressive processing. The wear and friction tests were performed on a pin-on-disc tribometer under phosphate buffered saline lubricated condition. Compared with the neat HDPE, the friction coefficients of the nanocomposites were reduced in all samples, yet only a couple of nanocomposite samples showed lower wear rates. Micro-hardness measurements of the nanocomposites were carried out and CNFs were found to be capable of increasing the material's micro-hardness. The effects of concentration and silane coating thickness of CNFs on the tribological properties of the resulting nanocomposites were analyzed and the wear mechanisms of the HDPE/CNF nanocomposites were discussed. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE9000134000004 [...] Wear characteristics of NiTi/Al6061 short fiber metal matrix composite reinforced with SiC particulates / Ozgen Akalin in Transactions of the ASME . Journal of tribology, Vol. 132 N° 4 (Octobre 2010)
[article]
in Transactions of the ASME . Journal of tribology > Vol. 132 N° 4 (Octobre 2010) . - 06 p.
Titre : Wear characteristics of NiTi/Al6061 short fiber metal matrix composite reinforced with SiC particulates Type de document : texte imprimé Auteurs : Ozgen Akalin, Auteur ; K. Vefa Ezirmik, Auteur ; Mustafa Urgen, Auteur Année de publication : 2011 Article en page(s) : 06 p. Note générale : Tribology Langues : Anglais (eng) Mots-clés : Fibre reinforced composites Martensitic steel Nickel alloys Scanning electron microscopy Silicon compounds Sintering Titanium alloys Tribology Wear resistance Wear testing Wide band gap semiconductors Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Wear characteristics of Al6061 composites, reinforced with short NiTi fibers, were investigated. The NiTi/Al6061 composite samples were fabricated using pressure-assisted sintering process in ambient air where the NiTi fibers are aligned unidirectional in the Al matrix. In addition, NiTi/Al6061 composite with 5 wt % SiC particulates and monolithic Al6061 and Al6061 with 5 wt % SiC particulates were processed in similar conditions. The wear tests were performed using a reciprocating tribometer in ball-on-flat configuration where the counterbody material was martensitic steel. The effects of fiber isotropy and SiC reinforcements on wear resistance were experimentally investigated in dry sliding. Wear properties of the samples were studied using an optical profiler and a scanning electron microscope analysis. The results showed that transverse NiTi fibers improve the wear resistance significantly. Samples with transverse fiber orientation show mostly abrasive wear, whereas, monolithic and parallel samples show adhesive wear mechanism. In addition, SiC reinforcements improve the wear resistance of the composite and the monolithic samples. Since the Al6061 matrix material is smeared onto NiTi fibers in a short period, all composite samples show similar frictional characteristics after certain period of running in dry sliding. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] [article] Wear characteristics of NiTi/Al6061 short fiber metal matrix composite reinforced with SiC particulates [texte imprimé] / Ozgen Akalin, Auteur ; K. Vefa Ezirmik, Auteur ; Mustafa Urgen, Auteur . - 2011 . - 06 p.
Tribology
Langues : Anglais (eng)
in Transactions of the ASME . Journal of tribology > Vol. 132 N° 4 (Octobre 2010) . - 06 p.
Mots-clés : Fibre reinforced composites Martensitic steel Nickel alloys Scanning electron microscopy Silicon compounds Sintering Titanium alloys Tribology Wear resistance Wear testing Wide band gap semiconductors Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Wear characteristics of Al6061 composites, reinforced with short NiTi fibers, were investigated. The NiTi/Al6061 composite samples were fabricated using pressure-assisted sintering process in ambient air where the NiTi fibers are aligned unidirectional in the Al matrix. In addition, NiTi/Al6061 composite with 5 wt % SiC particulates and monolithic Al6061 and Al6061 with 5 wt % SiC particulates were processed in similar conditions. The wear tests were performed using a reciprocating tribometer in ball-on-flat configuration where the counterbody material was martensitic steel. The effects of fiber isotropy and SiC reinforcements on wear resistance were experimentally investigated in dry sliding. Wear properties of the samples were studied using an optical profiler and a scanning electron microscope analysis. The results showed that transverse NiTi fibers improve the wear resistance significantly. Samples with transverse fiber orientation show mostly abrasive wear, whereas, monolithic and parallel samples show adhesive wear mechanism. In addition, SiC reinforcements improve the wear resistance of the composite and the monolithic samples. Since the Al6061 matrix material is smeared onto NiTi fibers in a short period, all composite samples show similar frictional characteristics after certain period of running in dry sliding. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] Wear-fatigue behavior of Ni88P11.78Co0.12Fe0.10 and Ni80.55Cr15.25B4.20 metallic glasses during rubbing against an eccentric rotating ceramic roller / C. Serrar in Transactions of the ASME . Journal of tribology, Vol. 134 N° 04 (Octobre 2012)
[article]
in Transactions of the ASME . Journal of tribology > Vol. 134 N° 04 (Octobre 2012) . - 11 p.
Titre : Wear-fatigue behavior of Ni88P11.78Co0.12Fe0.10 and Ni80.55Cr15.25B4.20 metallic glasses during rubbing against an eccentric rotating ceramic roller Type de document : texte imprimé Auteurs : C. Serrar, Auteur ; P. Guiraldenq, Auteur Année de publication : 2012 Article en page(s) : 11 p. Note générale : tribology Langues : Anglais (eng) Mots-clés : metallic glasses; wear-fatigue rupture Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : The wear-fatigue rupture of Ni88P11.78Co0.12Fe0.10 (NiP) and Ni80.55Cr15.25B4.20 (NiCrB) glasses prepared by planar–flow casting have been studied using a test under simultaneous constant and cyclic loading generated by an eccentric rotation ceramic antagonist. For better apprehending the phenomena related to the structural state changes of samples before and after tests, structural characterization by x-ray diffraction, mechanical characterization by measuring Vickers microhardness (HV 0.1) and chemical composition by X-ray photoelectron spectroscopy (XPS) analysis have been carried out on as-quenched and worn dull side ribbons. Rupture surfaces, in S–N curves, have been measured by scanning electron microscope. Wear-fatigue contact tests consist to impose, simultaneously, a traction strain and cyclic normal stresses which generate traction, compression, rolling, bending and shearing. All results obtained from the two selected glasses (NiP and NiCrB) are systematically compared with those of a nickel pure crystalline foil (Ni). We evaluate mainly the wear mechanism, the mode and the typical rupture surface observed in NiP, NiCrB and Ni specimens. We specify the conditions of obtaining these rupture surfaces which often present in smooth plane, veining and “chevrons” patterns. All results show a great wear and fatigue resistance for the two metallic glasses compared to Ni. The NiCrB wear resistance is superior to that of NiP, while the difference in their fatigue limit is not clearly distinct. The reasons for the differences in wear and fatigue behavior will be discussed in relation to the metallic glass thermal stability, chemical composition, microhardness and surface rupture topography. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE9000134000004 [...] [article] Wear-fatigue behavior of Ni88P11.78Co0.12Fe0.10 and Ni80.55Cr15.25B4.20 metallic glasses during rubbing against an eccentric rotating ceramic roller [texte imprimé] / C. Serrar, Auteur ; P. Guiraldenq, Auteur . - 2012 . - 11 p.
tribology
Langues : Anglais (eng)
in Transactions of the ASME . Journal of tribology > Vol. 134 N° 04 (Octobre 2012) . - 11 p.
Mots-clés : metallic glasses; wear-fatigue rupture Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : The wear-fatigue rupture of Ni88P11.78Co0.12Fe0.10 (NiP) and Ni80.55Cr15.25B4.20 (NiCrB) glasses prepared by planar–flow casting have been studied using a test under simultaneous constant and cyclic loading generated by an eccentric rotation ceramic antagonist. For better apprehending the phenomena related to the structural state changes of samples before and after tests, structural characterization by x-ray diffraction, mechanical characterization by measuring Vickers microhardness (HV 0.1) and chemical composition by X-ray photoelectron spectroscopy (XPS) analysis have been carried out on as-quenched and worn dull side ribbons. Rupture surfaces, in S–N curves, have been measured by scanning electron microscope. Wear-fatigue contact tests consist to impose, simultaneously, a traction strain and cyclic normal stresses which generate traction, compression, rolling, bending and shearing. All results obtained from the two selected glasses (NiP and NiCrB) are systematically compared with those of a nickel pure crystalline foil (Ni). We evaluate mainly the wear mechanism, the mode and the typical rupture surface observed in NiP, NiCrB and Ni specimens. We specify the conditions of obtaining these rupture surfaces which often present in smooth plane, veining and “chevrons” patterns. All results show a great wear and fatigue resistance for the two metallic glasses compared to Ni. The NiCrB wear resistance is superior to that of NiP, while the difference in their fatigue limit is not clearly distinct. The reasons for the differences in wear and fatigue behavior will be discussed in relation to the metallic glass thermal stability, chemical composition, microhardness and surface rupture topography. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE9000134000004 [...] Wear mode comparison of high-performance inconel alloys / Grant R. Fox in Transactions of the ASME . Journal of tribology, Vol. 132 N° 2 (Avril 2010)
PermalinkWear simulation of a reciprocating seal / Nándor Békési in Transactions of the ASME . Journal of tribology, Vol. 133 N° 3 (Juillet 2011)
PermalinkYearly simulation of the interaction between an ice rink and its refrigeration system: A case study / Lotfi Seghouani in International journal of refrigeration, Vol. 34 N° 1 (Janvier 2011)
Permalink